TM6900 Super resets when trying Blind Scan

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mr. ufeedo
    Newbie
    • Mar 2009
    • 8
    #1

    TM6900 Super resets when trying Blind Scan

    My TM6900 Super resets any time I try a Blind Scan. Has only been like that over the last week or so. I've tried the latest patch and has made no difference.

    Looks like I'll have to re-install, which I can do from the menu, unless anyone has any suggestions. I might even keep away from the patches.

    Is there any way to keep my channel lists / store them on the drive, and then put them back on the machine, as I have six satellites and don't want to start again?
    Tags: None
    • benny/9
      V.I.P. Member
      • Nov 2008
      • 1964
      #2
      Originally posted by mr. ufeedo
      My TM6900 Super resets any time I try a Blind Scan. Has only been like that over the last week or so. I've tried the latest patch and has made no difference.

      Looks like I'll have to re-install, which I can do from the menu, unless anyone has any suggestions. I might even keep away from the patches.

      Is there any way to keep my channel lists / store them on the drive, and then put them back on the machine, as I have six satellites and don't want to start again?
      ************************************************** *********
      hi m8,
      this could be caused by dead transponders in your satellite
      channels scan you could try deleating any dead tp's first then try a blind scan if the problem is still there then a factory re-set is next to try first put a memory stick in the receiver usb port turn on and click the usb button on the remote and got to data transfer and click>ok now you will see the file panel [it shout be clear if you used a empty memory stick]
      next click the red button[upload channel] now your channel list will copy on the memory stick. transfer this onto your computer to reload later next leave the dish on any satellite you wish, then if your motor is set for usuals motor settings write down your motor settings info long/lat etc: and now factory re-set your receiver then i would first load the official
      software from technomate.com then re-set your receiver language.time. tv settings,motor settings etc then reload your channel list, you do this the same way as you do with the patch or software.
      Please Read Carefully!
      No Sky UK NDS Videoguard Hacking Discussions.
      Viewing Pay TV without a valid subscription is illegal
      the files available are kept for experimental & educational purpose only
      original vu duo2 /vu zero/ tm-nano-se. v-box / 36v /1.2 dish,

        Comment

        • mr. ufeedo
          Newbie
          • Mar 2009
          • 8
          #3
          Deleting some non-active transponders did the trick, so all working now.

          Will keep the rest for future reference - will come in handy.

            Comment

            • DEMONACER
              Banned
              • Jun 2009
              • 122
              #4
              Had same problem with mine.Deleted dead and double transponders and it fine now.Pay special attention to double transponders on 13'east there seems to be a lot on there.Thanks Benni

                Comment

                Previous template Next
                Working...