My TM6800HD non super has suddenly stopped driving my TM2300 motor and 1m. dish automatically from the SAT button. I am using Diseqc 1.2 and can move the dish from the Motorised Setting menu using Move and Move Fine. The motor will also move using the POS button. So far I have tried resaving the satellite positions, reinstalling p705 original and then p706 and checked that Diseqc Motor is set to 1.2. Does anyone have suggestions as to what else I can try or is it time for a new box. Thanks.
-
-
Hi. Have you tried using USALS ?? Send it to a distant satellite like 42 east or 30 west just to check if motor is working(you may not get signals as alignment is different to 1.2) Also have you lost your satellite positions ie try to save them again using 1.2 and see if it works. Remember with 1.2 you need to manually find satellites and save their positions. Check also if you have green light on motor and not orange or red
Regards.
Comment