hi all got a technomate 1500ci super ,just wandering if anyone has downloaded a corrupted patch my reciver will not connect when you press connect on tm patches, a message comes up saying connect your reciver or turn it on, and the com port switches between 1 and 3 any help please
-
-
have you tried auto detect button to find correct port.
is it definately a serial null modem cable your using?PS3= krazylegz120282
please read the rules >>>>http://www.digital-kaos.co.uk/forums/f5/forum-rules-2/
if you're new to forums and want to make your first post please read here>>>>http://www.digital-kaos.co.uk/forums...ul-tips-30279/
if you like what people say please use the reputation or thanks button, dont just make a post to say thanks -
yes i have tried auto detect and the same message comes up and it is a null cable i have patched the technomate for years with itComment
-
Well turn your receiver off with the switch at the back, then when it asks you to turn your receiver on turn the switch on..it has always worked for me..
Read the Rules here; they apply to Everyone.
___________________
In the good old days, I hadDM800s HDOpenbox S10
TM500
DM500s
90cm FortecStar dish
Maxx 110cm Dish
Technomate 2300 Motors
sigpicComment
-
Do a forced download,a lways works in the end!
1) Download latest patch for your model
2) unzip/unrar patch
3) Open Darkman loader 187
4) locate the file you have just downloaded
5) click connect
6) switch your reciever off at the back
7) switch it back on again
8) loading will start automaticaly
This may have to be done a few times till it actually loads but it will definately load and then all will be ok again.Comment
-
Spot on
Thanks Fearona.
I have a TM1500CI+S and had patched it quite a lot of yimes successfully. Then number 299 came along and I couldn't get it to work. Tried a lot of variants and softcams without success. Patch 300 didn't make any difference and now patch 301 came and I was having the same bother. I had just about given up. Then I followed your instructions precisely and lo! it worked. The switching off at the back after connecting uo was something I hadn't tried. Many thanks.
Comment
-
I this a problem that is endemic to the 1500CI+Super? I have started to experience the same problem, however Fearona's solution is not working after six attempts at loading. The patch appears to load but after the load the box flashes a remote and sat dish while alternately displaying four 0's then a single zero. Please helpComment
Comment