Need info on TM7102

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • gooner18
    Newbie
    • Mar 2010
    • 9
    #1

    Need info on TM7102

    Hi, i need a closed source sat receiver with twin tuner + HDD recorder which will be replacing a sly box for a friend who needs a receiver that is easy to use & not complicated & the (TM7102 HD super+ )seems to fit the bill from what I have read ,as it will support CCcam & Ncamd ,what I want to know is when recording 2 different channels with this receiver have the channels got to be on the same transponder or will it record from 2 different transponders @ the same time as long as on the same satellite ,also is this receiver still supported with patches ,firmware updates &channel lists etc. on the forum,or if you can recommend another closed source receiver that has the same facilities as the 7102.
    thanks ,gooner18
    Tags: None
    • digicon
      V.I.P. Member
      • Jul 2009
      • 8261
      #2
      The last Patch that came out for the 7102 was Oct 13, so its still supported and no you can record 2 totally different channels at the same time as its a twin tuner

        Comment

        • gooner18
          Newbie
          • Mar 2010
          • 9
          #3
          Thanks for reply digicon,also while recording 2 different channels can you watch another channel.?
          gooner18

            Comment

            • digicon
              V.I.P. Member
              • Jul 2009
              • 8261
              #4
              For that you would have to pick a channel from the same transponder as one of the Tuners is actually recording from as most people would use a twin tuner to watch 1 channel and record another channel but if your recording 2 different channels then your stuck with the TP's that the tuners are locked to.

                Comment

                • gooner18
                  Newbie
                  • Mar 2010
                  • 9
                  #5
                  Originally posted by digicon
                  For that you would have to pick a channel from the same transponder as one of the Tuners is actually recording from as most people would use a twin tuner to watch 1 channel and record another channel but if your recording 2 different channels then your stuck with the TP's that the tuners are locked to.
                  ok thanks ,is there another closed source receiver that will do the same as the 7102 as it also offers freeview as well that has more support.
                  gooner18.

                    Comment

                    • digicon
                      V.I.P. Member
                      • Jul 2009
                      • 8261
                      #6
                      Originally posted by gooner18
                      ok thanks ,is there another closed source receiver that will do the same as the 7102 as it also offers freeview as well that has more support.
                      gooner18.
                      There probably are other receivers but not many that have a Built in T2 RF Modulator that has Freeview HD on board

                        Comment

                        • gooner18
                          Newbie
                          • Mar 2010
                          • 9
                          #7
                          Ok thanks was just a bit concerned about the support as it is for a friend & it will cost him about ?450 which is a lot of money if the box cannot be updated or will that not matter to much as it only going to be used for 28.2e . & as I am recommending it to him.
                          gooner18

                            Comment

                            • digicon
                              V.I.P. Member
                              • Jul 2009
                              • 8261
                              #8
                              Originally posted by gooner18
                              Ok thanks was just a bit concerned about the support as it is for a friend & it will cost him about ?450 which is a lot of money if the box cannot be updated or will that not matter to much as it only going to be used for 28.2e . & as I am recommending it to him.
                              gooner18
                              If its only being used for 28.2? east then Firmware updates wont matter at all, Once patched it will do what every other Ethernet enabled receiver will do which we cant discuss on here but you know what i mean

                                Comment

                                • gooner18
                                  Newbie
                                  • Mar 2010
                                  • 9
                                  #9
                                  That should be ok then for him.
                                  Thanks for all your help.
                                  gooner18

                                    Comment

                                    Previous template Next
                                    Working...