Questions Re: Technomate T-5200D USB

[dick b]

there is not too much open with patch and softcam these days
but here is the latest patch for your box and todays softcam.
if you right click on the softcam after unpacking it then open with notepad you can scroll down to the BISS section look for channels on 53East there are some russian ones that you can open(not many)you go to the channel you want to open then type 8280 in the h/set and the Biss menu opens select any line,line 1 if you dont have any already installed>ok then type the 1st 8 pairs into the 1st 8 slots followed by zeros in the next 8.channel should now open.nash dom,STV,disney and maybe others open this way there are also some FTA russian channels available you will find some German channels on 19.2E may open(it depends on patch no)but a lot of FTA stuff on there.

[Nutsandbolts]

Hi thanks for replying, ive got TM-5200D M2 USB receiver.
Most of the channels do not work for some reason, i believe i have tried installing one of the patches ive found on this forum, however it didnt make any difference.

I was wondering if you could help me by providing some specific links and instructions.

Forgot to mention most of the channels i am trying to get to work is ukrain/russian/german (Ive had a reciever before which have been installed by my friend and all them channels worked, however that reciever broke and with this new one i dont even pick most of the channels e.g. 1TV channel-russian. RTR etc.)

If you could help me, i would really appriciate it.


Thanks

You can get a few Russian and UKRAINIAN channels free of charge on HOTBIRD 13 east and SIRIUS 4.8 east satellites. You will need a motorized dish to enjoy the benefits of these channels and patches etc.


Regards

[voyt]

Dear dick b.
Sorry I have made a mistake ive got super tm-5200d usb, if you could post me the patch for it would be really grateful since i looked it up on forum and cant find it (new to the forum thing).

Thanks

Kind Regards

[dick b]

Dear dick b.
Sorry I have made a mistake ive got super tm-5200d usb, if you could post me the patch for it would be really grateful since i looked it up on forum and cant find it (new to the forum thing).

Thanks

Kind Regards

here is patch for your box and I made a slight alteration to my previous post regarding reading the softcam.

[Spoetnik1957]

Great stuff here!!!

[Spoetnik1957]

so if i'm correct,
i need a TECHNOMATE TM-5200 D USB then install the file and i can watch STV on 4.8 east?!

please replay.

Kind regards.

[dick b]

if you mean SVT1 and SVT2 they are both open with patch on a TM6800 and TM5400 super.
if its definately the non super you have try this patch