Hi all,
I'm pretty new to this and am having trouble setting up a TM-Nano 2 Super (http://www.technomate.com/store/prod...o-2-Super.html) with openvix-Hades.012 installed (http://www.openvix.co.uk/index.php?dir=TM-Nano2-Super/).
I am in NW England and have a single fixed satellite dish connected to the receiver in "Line Input 1" (nothing connected to "Line Input 2").
"Tuner A" is set to:
Configuration mode: Simple
Mode: Single
Satellite: 28.2 Astra
DiSEqC: No
"Tuner B" is set to:
Configuration mode: Not configured
Problems:
1. I tried setting "Tuner A" satellite to automatic, but every time it tried to tune (for each satellite) it failed.
2. I tried to use AutoBouquetMaker to scan for channels, but every time it says "Timeout for Tuner Lock" before finding anything.
To get a list of providers for AutoBouquetMaker I did an automatic scan, which found around 200 channels. I can watch these channels, and there are some sky channels, but not all of them (e.g. sky movies is missing).
The providers I have are: FreeSat, Sky ROI, and Sky UK.
I also have a Skybox F5, which works fine with my single fixed dish (using the same cable).
So I was wondering if anyone could help me figure out what's wrong/how to fix it? I have tried the following:
1) Switch cable from "Line Input 1" to "Line Input 2" and set "Tuner A" to not configured and "Tuner B" to simple, single, Astra, no DiSEqC.
2) Set "Tuner B" to loopthrough to "Tuner A"
3) Set "Tuner B" to equal "Tuner A"
4) Different combinations of providers (all 3, only Sky UK, etc).
I'm just completely stumped especially given how simple my setup is. I'm guessing it "shouldn't" matter if I use "Line Input 1" with "Tuner A" or "Line Input 2" with "Tuner B"?
Also I can FTP to the box fine, perhaps I could download a channel list? If so maybe someone could tell me what to download and where to put it?
Thanks for any help
Edit: I was slightly inaccurate above, I can get a list of providers as long as the satellite is set to Astra (haven't tried other satellites, it just won't show providers on automatic).
Also I tried using an earlier version, specifically openvix-Apollo.166, but I still get the same result, automatic satellite tuning fails on all satellites it tries and AutoBouquetMaker always times out for tuner lock.
I'm pretty new to this and am having trouble setting up a TM-Nano 2 Super (http://www.technomate.com/store/prod...o-2-Super.html) with openvix-Hades.012 installed (http://www.openvix.co.uk/index.php?dir=TM-Nano2-Super/).
I am in NW England and have a single fixed satellite dish connected to the receiver in "Line Input 1" (nothing connected to "Line Input 2").
"Tuner A" is set to:
Configuration mode: Simple
Mode: Single
Satellite: 28.2 Astra
DiSEqC: No
"Tuner B" is set to:
Configuration mode: Not configured
Problems:
1. I tried setting "Tuner A" satellite to automatic, but every time it tried to tune (for each satellite) it failed.
2. I tried to use AutoBouquetMaker to scan for channels, but every time it says "Timeout for Tuner Lock" before finding anything.
To get a list of providers for AutoBouquetMaker I did an automatic scan, which found around 200 channels. I can watch these channels, and there are some sky channels, but not all of them (e.g. sky movies is missing).
The providers I have are: FreeSat, Sky ROI, and Sky UK.
I also have a Skybox F5, which works fine with my single fixed dish (using the same cable).
So I was wondering if anyone could help me figure out what's wrong/how to fix it? I have tried the following:
1) Switch cable from "Line Input 1" to "Line Input 2" and set "Tuner A" to not configured and "Tuner B" to simple, single, Astra, no DiSEqC.
2) Set "Tuner B" to loopthrough to "Tuner A"
3) Set "Tuner B" to equal "Tuner A"
4) Different combinations of providers (all 3, only Sky UK, etc).
I'm just completely stumped especially given how simple my setup is. I'm guessing it "shouldn't" matter if I use "Line Input 1" with "Tuner A" or "Line Input 2" with "Tuner B"?
Also I can FTP to the box fine, perhaps I could download a channel list? If so maybe someone could tell me what to download and where to put it?
Thanks for any help
Edit: I was slightly inaccurate above, I can get a list of providers as long as the satellite is set to Astra (haven't tried other satellites, it just won't show providers on automatic).
Also I tried using an earlier version, specifically openvix-Apollo.166, but I still get the same result, automatic satellite tuning fails on all satellites it tries and AutoBouquetMaker always times out for tuner lock.