how to usb patch TM6900 combo super

[ailsat]

Hi all

Absolutely brand new to satallite. I have a tm6900 super combo and a 1 meter motorised dish. I want to patch the box using usb but have absolutely no idea of where to start.

[Manic01]

This is how to load official software and patches,softcam key files with a memory stick
************************************************** **************
FIRST ALWAYS MAKE SURE YOU USE THE CORRECT PATCH FOR YOUR MODEL
there are various models and only the correct patch will work or even load on your model
************************************************** *********************
From the forum first download the correct patch for your receiver,
(Patches here http://www.digital-kaos.co.uk/forums...9-a-63794/then open the zipped folder and send the patch to the usb stick. Also download latest Softcam http://www.digital-kaos.co.uk/forums...tml#post326004 and unzip and send to usb stick]
You are now ready to transfer the patch/softcam onto your receiver. next insert your usb memory stick in the usb port under the front flap and then turn the receiver on to a free to air channel ready to load the patch. then press the usb button on your remote. on the next screen go to data transfer and click>ok now you will see a panel with the patch on it, it will highlight,
press ok on the highlighted patch then it will load and when it gets to 100% and has loaded, and the receiver has re-booted [turned off and on again] and the channel opens. you have now loaded the patch,
Load the softcam the same way
__________________