TM-3200 2CA info needed?!?!

[lucky162k]

Hi,

I am new to the Technomate 3200 2CA receiver and I am looking for help!!!

Until not looking in this forum I got the TM3000 loader and the null cable to connect to the receiver.

I do not know the procedure of what to do, I mean, I downloaded the latest softcam keys from here to the receiver but I do not know for which satellite will crack the scrambled channels?!

All I want to do is to unlock the scrambled channels, and mainly for the Thor --- DigiTv ones...

If you can provide any help, would be much appreciated.

Thanks.

[benny/9]

Hi,

I am new to the Technomate 3200 2CA receiver and I am looking for help!!!

Until not looking in this forum I got the TM3000 loader and the null cable to connect to the receiver.

I do not know the procedure of what to do, I mean, I downloaded the latest softcam keys from here to the receiver but I do not know for which satellite will crack the scrambled channels?!

All I want to do is to unlock the scrambled channels, and mainly for the Thor --- DigiTv ones...

If you can provide any help, would be much appreciated.

Thanks.

*******************************************
first you need to load the latest correct patch for your model
then you load the tm softcam, and then the digi-tv chns on thor
will open for you, this is how you load the patches and softcams
******************************
how to patch a technomate 3000 model receiver with a null modem cable
**********************************************
[1] you need a null modem cable [female to female 9 pin ends]
if you use a laptop you also need a usb to serial converter
if your laptop does'nt have a 9 pin com port to use the cable in.
[2] [please note the tm 3000 series have there own loader and dont use the v187 loader] you must use the loader for the tm 3000 models
[3] now download the latest patch for your model [super or original]
you must use the correct patch they only work on the correct receiver.
[4] now that you have all the above and you have your receiver set-up and
all the satellites and channels with the free to air channels opening.
[5] first open the zipped folder and take the patch out ready to load on your
receiver if you download to your desktop, after you have opened the folder you will see the both the folder and the patch on your desktop the patch is now ready to load onto your receiver.
[6] leave your receiver set on a fta chn and connect the null modem cable from your 9 pin com port on your pc to the rs232 port on the rear of the receiver.
[7] next open and run the tm3000 loader panel, and if you intend to keep your receiver patched, make a shortcut to your desktop for the loader
this makes it easier and quicker when you need to patch or add softcamkeys.
[8] once the loader has opened click the browse button and window open for
you find the patch where you opened it, when you find the patch left click on it and then click save on the window, this will now close and load the
patch on the loader panel.
[9] next set the loader at the top of the panel to software and download.
next click auto detect on the loader panel and a small panel opens with version detected, click exit on it and then click connect on the panel and the small panel re-opens, then you click start on this panel and wait untill the patch has loaded fully and you will see erasing-writing etc: wait untill everything has compleated and it says finished. click finished and exit the loader panel. your receiver is now patched.
[10] if other providers channels dont open you will need to enter the softcamkeys file to open the channels, you do this the same way as patching. after you first set the loader panel to keys before useing the softcamkeys file.and then follow the same procedure as patching.
[11] finally you have now patched loaded the softcam and got the channels open,

[lucky162k]

Thanks....

Hi,

Thanks for the detailed instructions and Yes everthing is working great now...

What I found that when using the latest softcam folder keys, not all the CAS keys where applied...

I mean I still have the CAS: Conax, Nagra1, Viaccess2, Biss, Constant Dw, and Irdeto 2 keys missing?!

[benny/9]

Hi,

Thanks for the detailed instructions and Yes everthing is working great now...

What I found that when using the latest softcam folder keys, not all the CAS keys where applied...

I mean I still have the CAS: Conax, Nagra1, Viaccess2, Biss, Constant Dw, and Irdeto 2 keys missing?!

****************************
the reason you dont have keys for conax/nagra/viaccess and irdeto
is that there are no known keys for these providers now they have change
to more secure encryption versions, as for dcw and biss keys they cant be
added to a tm softcam you can only load them manualy with your remote
you go to a channel that uses the dcw or biss keys and on the remote
you type 8280 and a key panel will open you then scroll to a empty line
and enter the keys for that channel, save and exit now the channel will open
the only problem with these keys is you have to enter the key for every channel you want to view, also these keys change very quickly so keep
a note on which line each channel ghhas it's keys entered on then you
can over write the key when they change