Hi, can someone help i was upgradeing the patch on my Technomate 6900 Hd combo super and got a power failure and now it wont turn on it says on the front panel TECHNOMATE,
TECHNOMATE -6900HD+ SUPER WONT TURN ON
Collapse
X
-
if you go onto the official technomate site they have boot loader software which should sort you out but it must be loaded via rs232 null modem cable not usb I"d check if its suitable for the super as well. www.technomate.comLast edited by dick b; 26 January, 2010, 16:23. -
Do a forced download
1) Download latest patch for your model
2) unzip/unrar patch
3) Open Darkman loader 187
4) locate the file you have just downloaded
5) click connect
6) switch your reciever off at the back
7) switch it back on again
8) loading will start automaticaly
This may have to be done a few times till it actually loads but it will definately load and then all will be ok again.Comment
-
Frickin hell just thought i bricked the box but follow instructions a hey presto! cheers whooooaDo a forced download
1) Download latest patch for your model
2) unzip/unrar patch
3) Open Darkman loader 187
4) locate the file you have just downloaded
5) click connect
6) switch your reciever off at the back
7) switch it back on again
8) loading will start automaticaly
This may have to be done a few times till it actually loads but it will definately load and then all will be ok again.
Keep calm carry on.
Comment
-
Comment
-
Try this... switch the TM 6900 'Off' using the power switch on the rear of the receiver... then press and hold down the 'Menu' button on the front of the receiver as you switch the TM 6900 back 'On' using the power switch on the rear of the receiver... you will then see the 'Loader Menu' on screen... try the 'Factory Reset' option on the list and see what happens... also try the 'USB Download' option... I hope this helps...Comment
Comment