help settijng up tm 600

[pipecutter]

Hi to everyone.
Just got my first linux receiver and having a couple of teething problems.
I have flashed the UR image on and installed cccam.
I have installed 3 C:lines that i know work. tried them on my TM6900 then deleted them.
I then go to mini web interface and put the 3 lines into ccam edit. I then put the 3 lines into the ADD Line and click. they then go to the bottom of page.
Am I doing this correctly or am i missing something.
Also when i press blue button it says one softcam installed and both boxes below are default. I cant change these.

[Manic01]

They should be default.
Add the lines using DCC

[C_S_B]

Also when i press blue button it says one softcam installed and both boxes below are default. I cant change these.

Highlight what you want to change and use left/right on remote

[pipecutter]

(manic) did you mean tcc as it is a tm600.
The boxes are on default.
Is there a mewbie guide to putting lines in with dcc/tcc

[pipecutter]

Ok this is where I am at the mo. done what manic said.
installed the lines in using dcc. used ftp to var/etc/cccamcfg edited and saved. when opened lines are there.
In settings communication set up
ip 192.168.0.4
netmask 255.255.255.0
type Lan
namesever I put internet DNS
gateway 192.168.0.1


what do i put for port its at 80

channels are still scrambled

How do i check if they are connected. the lines work perfect in mt 6900super.

Its doing my head in now.

[pipecutter]

sorted it.....
after all tat it was me.
I didnt factory reset box after installing ur image.

next thing is to set home network up....

[MKDons73]

Have a google for Dreambox-CCcamconfig-Editor , its there , this connects to the cccam.cfg and you can add lines . better than DCC , FTP .
Mark

[abz2env]

hi, im a newbie to this and i was wondering where i can get an image from for my technomate tm-600 reciver? and also how to set this up including the cc cam.

thanks very much