Technomate 6800 HD Questions

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • philz03
    Newbie
    • Sep 2008
    • 12

    #1

    Technomate 6800 HD Questions

    Hello

    Since I really don't have a clue about most feautures of the TM-6800 I would like ask a few questions:

    1. I didn't update my software, but everything is runny smoothly. Are there any major advantages about updating?
    2. Do i always need to update with a null modem cable? Or can update with an USB key?

    tnx in advance...

  • eddieaok
    Newbie
    • Sep 2008
    • 18

    #2
    Updating TM 6800

    Hello Philz

    I have had various Technomates 1500 5400 and now the Technomate 6800 HD. It is much easier to update using a USB stick than a Null modem cable.
    The advantages of latest firmware and softcams are that you keep the various channels open.

    Ed

    Comment

    • .: JaCkPoT :.
      Retired Sat TV Addict
      • Aug 2008
      • 5607

      #3
      Usb is better and faster
      Last edited by .: JaCkPoT :.; 22 September, 2008, 22:56.

      Read the Rules here; they apply to Everyone.

      ___________________
      In the good old days, I had
      DM800s HD
      Openbox S10
      TM500
      DM500s
      90cm FortecStar dish
      Maxx 110cm Dish
      Technomate 2300 Motors

      sigpic

      Comment

      • .: JaCkPoT :.
        Retired Sat TV Addict
        • Aug 2008
        • 5607

        #4
        I only update software when the channels i was experimenting with stop opening otherwise there is no benefit whatsoever. Or if there is something new

        Read the Rules here; they apply to Everyone.

        ___________________
        In the good old days, I had
        DM800s HD
        Openbox S10
        TM500
        DM500s
        90cm FortecStar dish
        Maxx 110cm Dish
        Technomate 2300 Motors

        sigpic

        Comment

        • philz03
          Newbie
          • Sep 2008
          • 12

          #5
          tnx for the advise guys. I guess a softcam is an update that emulates a hardware cam?

          Comment

          • philz03
            Newbie
            • Sep 2008
            • 12

            #6
            Hey, quick question, since this is a UK forum, not Using ASTRA 1 & 3, are the softcams on this site of any use to me? Is there a list of the unlocked channels?

            Comment

            • .: JaCkPoT :.
              Retired Sat TV Addict
              • Aug 2008
              • 5607

              #7
              Originally posted by philz03
              Hey, quick question, since this is a UK forum, not Using ASTRA 1 & 3, are the softcams on this site of any use to me? Is there a list of the unlocked channels?
              ill tell you a list from the top of my head..
              1w. RCS DigiTV
              4e. Arqiva Cryptoworks
              13e. Polsat
              19.2e Premiere
              23.5e a few randoms
              Thats about it for packages but you will get a few channels here and there which open.
              Note: Nothing at 28.2e is viewable through softcams.

              Read the Rules here; they apply to Everyone.

              ___________________
              In the good old days, I had
              DM800s HD
              Openbox S10
              TM500
              DM500s
              90cm FortecStar dish
              Maxx 110cm Dish
              Technomate 2300 Motors

              sigpic

              Comment

              • philz03
                Newbie
                • Sep 2008
                • 12

                #8
                tnx

                tnx a lot, I will give it a shot tonight....

                Comment

                • .: JaCkPoT :.
                  Retired Sat TV Addict
                  • Aug 2008
                  • 5607

                  #9
                  Hope you get on well.

                  Read the Rules here; they apply to Everyone.

                  ___________________
                  In the good old days, I had
                  DM800s HD
                  Openbox S10
                  TM500
                  DM500s
                  90cm FortecStar dish
                  Maxx 110cm Dish
                  Technomate 2300 Motors

                  sigpic

                  Comment

                  • philz03
                    Newbie
                    • Sep 2008
                    • 12

                    #10
                    hello guys

                    I would like to implement the following, using a TM-6800, a Conceptronic CFULLHDMA, WD MY BOOK WORLD.



                    Following might be a problem:

                    1. WD Disk has two partitions FAT 32 for TM-6800 (connected with USB) and NTFS for Conceptronic + PC (HD Rips are often more then 4 GB of data) also connected over Gigabit Ethernet.
                    Do you think the TM-6800 will handle such a drive?

                    Comment

                    • .: JaCkPoT :.
                      Retired Sat TV Addict
                      • Aug 2008
                      • 5607

                      #11
                      im not sure about that to be honest. the technomate was desighned for simplicity rather than the technical side. but maybe someone else shed us some lite on this.

                      Read the Rules here; they apply to Everyone.

                      ___________________
                      In the good old days, I had
                      DM800s HD
                      Openbox S10
                      TM500
                      DM500s
                      90cm FortecStar dish
                      Maxx 110cm Dish
                      Technomate 2300 Motors

                      sigpic

                      Comment

                      Working...