TM3200d

[celticnthell]

I need a little help guys im looking to open bullsat on 39e i have the new keys okay. but im using a new box its a tm 3200d and i have been using magic loader v 1.1.5 with the patch of phantom patch v2.54 is this correct as bullsat will not open for me thanks..

[Manic01]

No use the latest one from here
Download center
And also latest softcam on there.

[celticnthell]

No use the latest one from here
Download center
And also latest softcam on there.

Hi again using the patch 25/9/10 and loader v1.1.5 and latestkeys with no joy using a null cable.
I have followed the tut to the letter and all downloads to the stb go through ok just cant get bullsat to open im i missing something? Or can 3200d be patched correctly?
(update)
I have just put the latest tecnomate firmware on then patched the latest patch v2.59 and latest keys with no joy.

[Manic01]

Enter keys manually and try.
Only Irdeto channels open.

[celticnthell]

thanks again for the help manic01. how do i manully input the keys is it a hex file?

[dick b]

go to menu>system information>cas menu>ok scroll to ident (060400) then using the navigation buttons you can move around to alter the keys.to read the keys open with notepad its slot 5/6.(I"v sent a copy)

[celticnthell]

Thanks again guys hopefully get it to work now......

[celticnthell]

Hi again guy's i just got finished work late and manually input the keys given above i rewrote the page and checked checked and double checked and still not working im am using latest patch and loader v1.1.5 any more ideas greatly appreciated...As i now feel like a twat as im usally good with this stuff

Celtic

[dick b]

I"v sent a couple of cas menu shots showing what it should look like(sorry about the quality its an old crt set) if your menu does look like this it can only be you have the wrong patch in for bulsat as not all patches will open it.try the patch I"ve sent its supposed to be a Bulsat fix.

[celticnthell]

The cas menu is a more modern looking menu in the 3200d im using mate. I have checked the keys put in manually and they are correct and stored it must be a fault somewhere in the box as i have now really done everything possible to get it working with no joy. I will try this patch and upload the keys via rs232 and manually input them again then its going out the window ...Thanks again for all the replys guys it is appreciated..

I"v sent a couple of cas menu shots showing what it should look like(sorry about the quality its an old crt set) if your menu does look like this it can only be you have the wrong patch in for bulsat as not all patches will open it.try the patch I"ve sent its supposed to be a Bulsat fix.

[Manacho]

Any instructions on how to upload the key files

[dick b]

Any instructions on how to upload the key files

do a couple of posts 1st then try again