got all sats set up fine on technomate 5400ci motor finding them. 26 east just out can u do a fine tune and save without loseing all the rest
-
-
if on usals you can fine tune by >installation>motorised settings>ok then drop down to position setting and alter your longitude setting by 0.2 degrees at a time E/W to max signal.its best do do this on 1West this will tune all sats in at once.
if on diseqc 1.2 go to full screen with an active TP on sat required and press blue button on handset then in the popup window move dish e/w for max signal and save.this will only affect the chossen sat.
But you need a big dish for most of 26E
Comment