TM 1600 2CI - Dutch channels

[paulllllll]

Apologies if I have put this in the wrong place..

New to this...I have motorised dish and switch between 19.2E for German channels and 28 for English channels.

Would like Dutch channels on 19.2 E (apparently there are some on Astra 3B 23.5E but my receiver doesn't have that!?) and have loaded Phanompatch 24/11 and Manic Softcam from 23/09...no joy.

What am I missing? Should I be able to see Ned1, Ned2...someone mentions it in one of these threads but I am unsure whether I should be able to see them. If not, what channels should I get?

Thanks

[Manic01]

Latest softcam required.

[dick b]

astra3/[email protected]

if this sat is missing from the data base you can add it this way on a std TM.using usals
Menu>installation>satellite setup>ok>ok,scroll to empty position(0.00) and press yellow button (save)>exit>exit>advanced search>green button add TP for FTA dutch channels on 23.5E this is 11.914 in the transponder line,27500 in the symbol rate line and H in polarization.repeat for any other TPs wanted.then exit>motorised settings>sat degrees 023.5E for astra 3a/b>go to>ok when motor stops & snr/agc are over 75/85 press red scan button choose search type then highlight press ok>ok.

[thijs]

try spudds softcam should open the dutch irdeto channels on 19.2 patch does not open any dutch channels on astra 1a3d 23.5 east because they are all seca channels i think it still opens some german channels on that satelite

[paulllllll]

Still no joy....any other ideas. Thanks

[paulllllll]

Thanks Dick B. Thanks for your help. I did it but the only channels I have coming through on four transponders are pay ones...the only ones not are the canal+ menu thing...

[thijs]

do a scan with network search "on" should bring up the regionale
kanalen, brabant would be the best for me.
and glenn's softcam opens canaal digitaal on 19.2e