TM7100-HD BISS Problem

[rich370uk]

Hello all,

Am hoping someone can help... Have patched the above and am able to enter a BISS code (that I 100% know is correct) but when I enter the code (+ 0s on the end) save and go back in some of the digits have changed.. So I therefore can't descramble the channel

Anyone come across this or know if it's a known problem?
Many thanks!

[Manic01]

They do change themselves.
If you make sure you are on the channel you want to open, then enter the keys it will work.

[mdt]

Hello all,

Am hoping someone can help... Have patched the above and am able to enter a BISS code (that I 100% know is correct) but when I enter the code (+ 0s on the end) save and go back in some of the digits have changed.. So I therefore can't descramble the channel

Anyone come across this or know if it's a known problem?
Many thanks!

is it these keys that change? key. ** ** ** 00 ** ** ** 00 . you could try entering the 16 digit key twice instead of the 16 digit key and then 16 zero,s. if you are entering the correct key it should clear unless there is a fault in the patch. try a earlier patch to rule that out. regards mdt