Latest Technomate Softcam Keys *Regularly Updated*

[popol40]

TM Softcam key Thanks to technomaker

**Update**

Bulsat Key Update 01/04/2013


Keyfile works on Technomate, Blade, DrHD, Clarke Tech Receivers


Regards

Hi, thanks again for all the Tm key file, as it is said we can open french TNTSAT programs, do i need the special TNTSAT card for receiving these channels, if it is the case , i was told that these cars are working only with specific decoder?many thanks for your answer?

[mdt]

Hi, thanks again for all the Tm key file, as it is said we can open french TNTSAT programs, do i need the special TNTSAT card for receiving these channels, if it is the case , i was told that these cars are working only with specific decoder?many thanks for your answer?

firstly which box are you using? the tntsat channels open on most boxs patched with 3rd party firmware or via gbox/oscamymod on E2 boxs. start a new thread in your relevent box section or general sat section describing your box,dish size and location and someone will be able to help/advise you. regards mdt

[popol40]

firstly which box are you using? the tntsat channels open on most boxs patched with 3rd party firmware or via gbox/oscamymod on E2 boxs. start a new thread in your relevent box section or general sat section describing your box,dish size and location and someone will be able to help/advise you. regards mdt

Many thanks for your answer, before opening a new thread, i give you the response to your question my box is t: Tm9600Hd Combo super +,Phantom patch 752, pluss the up to date keys.I have try connect on the frequency for TNT SAT and the box doesn't decode the channels, as it is wrote that the keys opens the TNT SAT i thing i must use some other way to decode these channels.Regards

[mdt]

22-5-2013

B***** NOW AND NEXT


THANKS TO TECHNOMAKER


regards mdt

[popol40]

Hello mdt many thanks for your reply , but was "B*****NOW AND NEXT" means, i am sorry i a am french and don't know all thesubtlety of English language.regards.

[excollier]

It's ok, use it.

[finger]

Hi,
thank you for your post.
I have the same question about the TNTsat, I have a TM6900 super combo, 100cm motorised dish.
the same phantom 752 and the last "SoftcamMotor.zip". by the way why did the name change, from softcam?
did I miss something?

[excollier]

No, this softcam just contains more satellite positions for a motorised system, rathe than just a couple of sats.

[finger]

thank you, if I understand well, it gives new positions for satellits and has no softcamcodes in it? I had the impression it help to decode some staff.

[digicon]

thank you, if I understand well, it gives new positions for satellits and has no softcamcodes in it? I had the impression it help to decode some staff.

It is a softcam and when loaded in the appropriate receiver will unlock various channels, the softcam file works on satellites form 45? east to 45? west, It will not open everythinh on every satellite the range i gave you is just that a range to & from that the file covers. If you want to see what opens then have a look at this post here: http://www.digital-kaos.co.uk/forums...lators-332141/

[mdt]

2-6-2013

B***** NOW AND NEXT

THANKS TO TECHNOMAKER

regards mdt

[IPA]

Hi guys, I've just purchased a 5402 super + and need to know how to put the softcams on it. Do I need to load Phantom Patch first or is there a newer patch available?

[digicon]

Have a look here at the guide : http://www.digital-kaos.co.uk/forums...chnomate-7310/ for the 5402 it will more than likely be an M2 version if the box is brand new Patch is here: Download center

[d191405x]

keys

Thanks all sorted!

when i goto download page and click to download, it opens as some sort of text file!
what am i doing wrong ?

[Carew6]

12-06-2013

Thanks to technomaker.


SoftcamAll-12-06-2013.zip


..just click on this Zip file and it should download, then Unzip it and you should have a .key file to load to usb stick and then to receiver.