Signal Problem when box comes out of standby (Vu Uno)

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • 215liverpool
    Member
    • Oct 2009
    • 69
    #1

    Signal Problem when box comes out of standby (Vu Uno)

    Hi there

    I wonder if anyone else has has this problem with their Vuo Uno.

    I am using the latest BH 1.6.6 and I have done the FPGA update.

    When my box comes out of standby after being left for a few hours I get no signal when I try to display a channel on the screen which was previously fine before the box was on standby.

    If I reset my box (GUI restart) the channel comes back no problem but this causes a big problem as I can't use timer record.

    I also get this problem when I use the media player for a period of time and then go back to watching a satellite channel.

    My LNB and cable are fine as it's okay on another satellite box that I have.

    Anyone have any ideas what is happenning ?
    Tags: None
    • dell_xps
      V.I.P. Member
      • Dec 2008
      • 2558
      #2
      You most likely have the hard drive stopping/spinning down as it goes into stanby m8.
      Failing that install Vix :-)

        Comment

        • 215liverpool
          Member
          • Oct 2009
          • 69
          #3
          Cheers for the reply

          Do you think if I reduce the time before the external HDD goes into standby then that might help ?

            Comment

            • dell_xps
              V.I.P. Member
              • Dec 2008
              • 2558
              #4
              Give it a go, I have mine set to zero spin down m8, no lag changing channels etc.

                Comment

                • 215liverpool
                  Member
                  • Oct 2009
                  • 69
                  #5
                  Originally posted by dell_xps
                  Give it a go, I have mine set to zero spin down m8, no lag changing channels etc.
                  How do I set it to zero spin down ?

                  All I can see is an option to set the length of time before the external HDD goes into stand by.

                  If I set the it to 0 under this setting it means the HDD drive is always "live"

                  Thanks for your help

                    Comment

                    • dell_xps
                      V.I.P. Member
                      • Dec 2008
                      • 2558
                      #6
                      Originally posted by 215liverpool
                      How do I set it to zero spin down ?

                      All I can see is an option to set the length of time before the external HDD goes into stand by.

                      If I set the it to 0 under this setting it means the HDD drive is always "live"

                      Thanks for your help
                      Yup must be what I have it on m8.

                        Comment

                        Previous template Next
                        Working...