Vu+ Duo Modulated Out

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • systemseiko
    Member
    • Sep 2010
    • 40

    #1

    Vu+ Duo Modulated Out

    I am finally going to break the bank and purchase a VU+ duo, i have slight reservations mainly around home distribution.
    My current setup is a Spiderbox and Openbox s10, the spiderbox is modulated internally whereas i have wired the Openbox via component through a modulator, both these are combined using a Global SPC4F and controllled via Infrared with tv link +extender.
    My question on VU+ is if i use an additional modulator to send out a specificed channel will that effect my overall picture on my main TV, eg VU+ duo out HDMI, i then use a scart to modulate the signal to home distribution, can the box define 2 seperate signal outputs?

    I know this is probably long winded but i am curious as to what signal quality i would receive, feedback welcome?
  • dell_xps
    V.I.P. Member
    • Dec 2008
    • 2558

    #2
    I would say yes, but easier way is to use the web browser and stream up to 6 computers. Stream in HD, if you have a good enough router/network, homeplugs seem to stream HD content a million times better than using a wifi signal.
    I'm sure RuberDuck will be along to give you a more in depth answer.

    Comment

    • RuberDuck
      Banned
      • Sep 2010
      • 1724

      #3
      sorry mate it's not really a area i know much about but i'm sure others would and will help as and when they see this thread.

      Comment

      • talk2juniornow
        Newbie
        • Jan 2012
        • 7

        #4
        Unfortunately the box ix unable you cant define 2 outputs in the settings.

        Comment

        • digicon
          V.I.P. Member
          • Jul 2009
          • 8261

          #5
          All the outputs are active at the same time so you can use an RF modulator to distribute the signal

          Comment

          • systemseiko
            Member
            • Sep 2010
            • 40

            #6
            Just an update, finally was able to sort out the modulated output for my home distribution, i ended up using the component out to a modulator via an IR repeater, the picture quality is superb, actually superior to that of both spiderbox and my old $ky STB.

            Thanks for all the help.

            Comment

            Working...