Viewing card crashes duo clone

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • psul
    Junior Member
    • May 2008
    • 24

    #1

    Viewing card crashes duo clone

    Just received vu+ duo clone from Aspleys, fast service by the way. Just discovered that if I use both card slots the box crashes? It's fine with one card in either slot but if a second card is entered it immediately crashes and won't restart until one card is removed.
    Anyone come across this before?
  • dell_xps
    V.I.P. Member
    • Dec 2008
    • 2558

    #2
    Why do you need 2 cards it at once m8 ?
    Are you using any cam software ?

    Comment

    • psul
      Junior Member
      • May 2008
      • 24

      #3
      Using a gamma card and a sky card with oscam. Either card in either slot is fine on its own but as soon as second card inserted the box locks up. Locks up half way through booting unless one card is removed. Very strange. Will have another play tomorrow with diffent cams .

      Comment

      • lincsat
        DK Veteran
        • Jun 2008
        • 1228

        #4
        Maybe it's the Gamma card conflicting with the Sky card, or something with your Oscam config. If all else fails, you could try an external Omnikey or similar for one or both of the cards and see if that works.

        Comment

        • digicon
          V.I.P. Member
          • Jul 2009
          • 8261

          #5
          I have 2 freesat Sly cards in mine and they have never crashed it had them in since day one of owning the Duo

          Comment

          • psul
            Junior Member
            • May 2008
            • 24

            #6
            been having a play this morning.
            Having same problem with cccam on its own with these 2 cards together. BUT I also have a dutch freesat-type card and that together with the sky freesat card are fine in both oscam and cccam???
            Not too important as I can run my gamma in my old dm800 no problem, its just got me baffled though.

            Comment

            Working...