clone duo with no display

[Bumsrus]

Hi rubber duck , yes flashed with newestbootloader before flashing the vix image, but that didn't work.

Potrobber , yes it was preloaded with blackhawks however had some issues with the tunners so decided to flash new image to see if that would help, but only hindered me as cant even get the box started

[Bumsrus]

nop , new usb not working

[potrobber]

when you switch box on with no usb stick in it does box boot up or how far does it go?

is this what you used to update box again

http://www.digital-kaos.co.uk/forums/f193/vu-duo-clone-3-1-1-kernel-update-255713/

m8 look on ferrari vu website there is a way of bringing bricked box back to life if you need to try it and also some more info

pm sent

[potrobber]

m8 i just read this thread again and when you say the part below tried flashing boot and removed usb

tried flashing boot and seemed to work as display asked me to unplug usb and reboot, then tried flashing vix image and display got stuck on "reading usb" for 15 minutes.

when you do the kernal update to 3.1.1 thru supplied null cable and ic chip you just load the image with usb stick after update and box works as should

what did you load from usb stick in the part above where you state tried flashing boot?

[Bumsrus]

the file i flashed to the receiver was : duo_cfe_3_0_usb
should i be flashing the 3.1.1 Kernel Update instead?

[RuberDuck]

the 3.1.1 kernel is part of the actual image so ne need to flash it separately.

[potrobber]

the file i flashed to the receiver was : duo_cfe_3_0_usb
should i be flashing the 3.1.1 Kernel Update instead?

the correct boot loader and kernal would have been on your box if it had v2 sticker and running black hole image

all you should have done was loaded the vu plus file with vix image to fat 32 usb stick and put in front of box turned on box and loaded image

[Bumsrus]

the correct boot loader and kernal would have been on your box if it had v2 sticker and running black hole image

all you should have done was loaded the vu plus file with vix image to fat 32 usb stick and put in front of box turned on box and loaded image

this is what i did but the box would not load so thats when i tried to flash this file: duo_cfe_3_0_usb which contains: cfe_cfe_auto

[potrobber]

can you get the box to come on and then do a factory reset?

then connect it to the null modem cable with ic chip and do the update i posted before then load new image

[digicon]

If you are really struggling then head over to ferrari forums as they have now uploaded some .nfi images which can be loaded via the RS232 port with the supplied lead.

[Bumsrus]

can anyone provide a link to the .nfi images in the ferrari forums pls

[andy91]

can anyone provide a link to the .nfi images in the ferrari forums pls

We cant go posting other forums details on here mate.
Register on their site and im sure someone will help you.

Andy.