vu+duo and the famous red light

[deenass]

hi, my vu plus clone seems to be brick
i have succeffuly flash
UpdateAllFlash.exe and duoboot.bin
i triy to send an image BlackHole-1.6.bm750_nfi whith v+ util so it doesnt seem to work: please restart your machine a 20%

1: Vu+ util and the result

1 Extract the image
2 Enter into the CFE mode...and thit stopped a 20%

somebody can help me please

[DOUGALMCD]

Did you brick it by flashing or updating wrong file or is your psu faulty. Are you using null modem cable with nfi image?

[deenass]

Thanks

Hi doug and thanks for your help..i bought it on the internet so i received it like this... The seller didnt told me the vu was brick.. I cant contact him any more....
So i use a null modem whith the board.. I could flash it whith the file Secret DUO. Bin.. But xhen i restart it i just have this red light...

[potrobber]

if you just bought this of ebay? why not just file a paypal claim if it was not as described

if not of ebay how did you pay?

why would you start to all this flashing files ect if it just had a red light at start up

there is loose connections cause red light issues and would have needed checked before all the
input of files that it more than likely did not need

[deenass]

thanks

ok for your answers so do you know this type of problem??

[potrobber]

open lid and check the main connection from psu to main board make sure its pushed fully home and seated correctly

i have seen lots of psu connections not pushed fully home and this just leaves red light on front

[deenass]

no, all the connections are ok