where is satelite stored position list kept in vu+ dou

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • the goat
    Top Poster
    • Mar 2010
    • 122

    #1

    where is satelite stored position list kept in vu+ dou

    hi
    been trying to setup my motorised disc no and off for months now
    finally got it sorted (had probelms with trees, dish size, motor,) for a five minute job this has been agro

    what i've found is the motor is not tracking the arc right
    if i setup 28e at 99% 19 13 10 7 all ok but 4.8e 8w are miles out, i have to do tiny moves west on the disc motor
    so it looks like usals not working with my motor

    so i'm going to move disc by satelite postions,
    where do i find the satelite stored postion list that the vu+ duo uses
    see how to do it in my old dreambox, but can't see it here
  • benny/9
    V.I.P. Member
    • Nov 2008
    • 1964

    #2
    Originally posted by the goat
    hi
    been trying to setup my motorised disc no and off for months now
    finally got it sorted (had probelms with trees, dish size, motor,) for a five minute job this has been agro

    what i've found is the motor is not tracking the arc right
    if i setup 28e at 99% 19 13 10 7 all ok but 4.8e 8w are miles out, i have to do tiny moves west on the disc motor
    so it looks like usals not working with my motor

    so i'm going to move disc by satelite postions,
    where do i find the satelite stored postion list that the vu+ duo uses
    see how to do it in my old dreambox, but can't see it here
    **************************************
    if your motor is set up correctly and you have the correct long/lat settings
    the motor will find all the sats. if you want to use diseqc 1.2 settings you
    have to select advanced in the tuner config and give all the sats you set a different number, so if you start at 30w as number 1 and go to 15w that will be 2 and so on for all sats you want on your list
    Please Read Carefully!
    No Sky UK NDS Videoguard Hacking Discussions.
    Viewing Pay TV without a valid subscription is illegal
    the files available are kept for experimental & educational purpose only
    original vu duo2 /vu zero/ tm-nano-se. v-box / 36v /1.2 dish,

    Comment

    • jimleeds
      Junior Member
      • Jul 2012
      • 25

      #3
      I was having same problem with my motorised setup adjusted elevation a couple of degrees and all was fixed think it has around 75-90% on most sats instead of being high on 28.2,19,16,13 e and nothing on the west side
      technomate tm-2t oe attached to a tm2600 with a 1m dish

      Comment

      • the goat
        Top Poster
        • Mar 2010
        • 122

        #4
        thanks guys
        my nieghbours tree is right in the path of the signal
        had to put a longer pole up to get the signals,
        i'll go up there ladder again and just give it a little bit of up and down movement on the dish

        Comment

        Working...