No channels at all Help please

[Mr G Monkey]

Hi Me again

On friday my vu duo started to mess about, i turned it on started up no problem, but would only show fta channels, now when this happens i just reset my router and all the other channels work. but this time after i reset and tried to change channels, none of them work.

reflashed the box(175 bh again) and it work ok for 10 mins then its the same no channels SNR is 99 per cent.. I am really stuck and dont no what to do, any help would be greatly appreciated.

[cactikid]

recheck your lan connection and maybe you have a cheap lan cable.

[Mr G Monkey]

hi yeah i check the two cables going in on a skybox i have lying about and it worked no problem, it was working grand after i flashed it for 10 mins, then no channels at all, and i reflashed againa dn no channels at all from the start, thanks also when i do a scan it finds nothing

[cactikid]

make sure you are scanning on correct sat as the wrong one will give you no channels.

[Mr G Monkey]

yeah scanning 28.2 still no joy, thanks for suggestions so far

[DOUGALMCD]

Did you flash box with a different image or the same one you had?

[Mr G Monkey]

same one, bh 175

[DOUGALMCD]

Try 1.7.2 and if it works you can try 1.7.5 again.

[cactikid]

is this box a clone or original?

[DOUGALMCD]

Sounds like a clone.

[cactikid]

thinking that way and tuner issues

[Mr G Monkey]

think its a clone, are tuners easy to replace if i need to

[DOUGALMCD]

I had a box do that it was like it had frozen and tried a couple of different images and it booted and no problem since. Sometimes you get it easy

[DOUGALMCD]

not on duo.

[DOUGALMCD]

If it's a clone it usually will have a sticker on the box telling you what version you have.