VU Duo help with CCcam

[skratch]

Hi all

Not sure how much anyone can help me i have been trying for days and ready to give up, i have CCcam and a Nline but how do i configure the CCcam.cfg file i was given? please put me out my misery and HELP ME!!!
Sorry if i have posted in the wrong place.

[cactikid]

read here first.

http://www.digital-kaos.co.uk/forums/f5/forum-rules-2/

[skratch]

read here first.
http://www.digital-kaos.co.uk/forums/f5/forum-rules-2/

Hi cactikid

thanks for the advice so without saying too much about CCcam can i get help on here or not?

[digicon]

Hi cactikid

thanks for the advice so without saying too much about CCcam can i get help on here or not?

That parts a little difficult as the Forum Rules state no discussion on Card sharing which in a way is what you are asking, All i can say is from your original post forget the Cam you mentioned and do a search for one that starts with MG and has 1.38 at the end.

This will work far better than your first option

[skratch]

That parts a little difficult as the Forum Rules state no discussion on Card sharing which in a way is what you are asking, All i can say is from your original post forget the Cam you mentioned and do a search for one that starts with MG and has 1.38 at the end.

This will work far better than your first option

Thanks for the quick reply m8 I have tried MG with vix and it shows up on the list and i can start it but there is no config when you press the blue button (unlike CCc)

[digicon]

I know what you mean but with the type of data you have it will work better in that type of cam due to the Cache feature of that cam unlike CC which does not have this feature

[gji25]

you will also need to make a file called newcamd.list (right click on your desktop and make a new note pad document and name it newcamd.list) cut copy and paste your cws line (in your case your n line) in there and save. then drop the file in the var/keys directory in your box using dcc .

[digicon]

When you install any Cam from scratch then any Config files are already in the appropriate folder

[skratch]

I know what you mean but with the type of data you have it will work better in that type of cam due to the Cache feature of that cam unlike CC which does not have this feature

**update** got things working thanks for all your help so far, so now i know it works im ready to try MGc

is this still correct

CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000CWS = 192.168.1.1 20000 dummy dummy 10 02 13 04 15 06 17 08 01 10 11 12 13 14

and put Nline in where dummy is or do i have to change ports and ip?

[skratch]

**update** got things working thanks for all your help so far, so now i know it works im ready to try MGc

is this still correct

CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000CWS = 192.168.1.1 20000 dummy dummy 10 02 13 04 15 06 17 08 01 10 11 12 13 14

and put Nline in where dummy is or do i have to change ports and ip?

Its ok ive done it