VU+ 2 Solo Help plz

[P&D]

I have received the box 2 days ago & after a weeks reading before i got the box (many thx again to digicon for the pointers)
this is where i'm up to.....

backed the box up...just in case via VUCC

I have set the box up in the setup menu....for the motor settings & the rest..
formatted the usb drive via the box (sata drive ordered) & everything has gone as it should all the sub folders loaded on the drive....

Loaded the sats list by catseye (many thx for your work).

Blakhole 2.0.3 Hyperspace loaded

Im trying to load the files below
I have put them in the Temp folder & rebooted the box but no joy...

Do you have to load all 4 files in the below ??

CCcam211_full_E2_bh.tgz
CCcam213_full_E2_bh.tgz
CCcam214_full_E2_bh.tgz
CCcam221_full_E2_bh.tgz
Again many thx to the poster...

if so do you do this one by one or altogether...because when i unzip them they try to overwrite each other...
I'm going round in circles.....SORTED uploaded via FTP

is there anything else that i might need to load on the box ???

Any help plz would be appreciated (plz go easy on me i'm new to all the tech terms like DCC ..VUCC ect..but i know how to use Google)
regards p&d

[digicon]

You only need one of those Files FTP'd to /tmp then on blackhole press Green Button then Yellow button which takes you to addons and use the Blackhole .ipk installer then reboot

[P&D]

You only need one of those Files FTP'd to /tmp then on blackhole press Green Button then Yellow button which takes you to addons and use the Blackhole .ipk installer then reboot

Cheers mate all sorted as you said its not all that hard sorting the box out ..all tho 100 hours of reading does help

it was more of a hair pulling experience trying to put the dish up than setting the box up

VUCC is a great little program & very user friendly thx for the pointer...
Tried the openvix latest ver ....then B/hole & decided to stick with blackhole...

The only problem i'm having at the moment is trying to load Tspanel 5.4 keep getting an error message.....in the photo below....any pointers mate where i'm going wrong plz..

everything is setup for the poplar sat working great
just need to get the special bit for the other sat's

Just a 2p worth anyone thinking i might buy the VU+ box ....but it looks complicated to setup believe me its not.....but i would advise a lot of reading would be recommended....but the wizard is great on the box...

Again digicon many thx for your help i sound like a record stuck but cheers mate fully grateful

[cactikid]

were you downloading from plugins or trying to ftp from downloads,i had an issue with an ipk kept on getting errors,tried on another pc it loaded straight away,might have been a corrupt file download etc.

[P&D]

Hi i got the plugin for this post http://www.digital-kaos.co.uk/forums...-image-205464/

I have tried to FTP it across & tried the IPK installer both end up giving the same error

just tried to load a different plugin & got a similar error.....i will try a different comp & report back

Thx cactkid

Tried on another comp but still the same....can't seem to load anything on the box when i try to FTP them across to the temp folder
the are showing in the Addons.IPK installer....but everything i try to install comes back with errors...

Any ideas plz

[cactikid]

just checking my solo2,just down loading plugins and in extensions there is tsmedia as i used to have tspanel but crashed box.

[P&D]

I have also tried to install them via usb
they seem to install right but are not in the plugins menu
I have switched the box off & on after the install

The box won't accept any plugins

so i installed an earlier version of openvix to see if that works.....no go
Iv'e been digging about on the internet & the the error i'm getting is Bad magic number in /usr/lib/enigma2/python/Plugins/Extensions/Tspanel/_init_.pyo

could this be the drivers on the box stopping the plugins loading because they are trying to overwrite files on the box ???

any advise plz

[athenrybhoy]

dont think ts panel is compatible with the new oe versions of blackhole ,bh1.7.9 was last time i used it

[P&D]

I found out why

i was trying to load the 1.6 OE version instead of the 2.0OE version

all sorted now.....7.2 TS-panel great plugin