vu+solo

[hussein]

how do i delete a channel on this image linuxsat-support BH 1.72 UK Ready Backup

[DOUGALMCD]

Press forward on dpad and the channel you want to delete highlighted press menu then remove entry.
You can use dreamset or dbedit to create your own lists.

[xxxpitbullxxx]

Good morning to all I ask for help for my vu + clone had only 166 image I discovered later that it was a clone, but now I had purchased I updated the kernel to 3.1.1 then 1.7.6 then also the image but no 1.7 .5 1.7.4 1.7.3 1.7.2 and still nothing does not work now even with the 1.6.6 what should I do? please help thanks
1 -installing the soloboot.bin with UpdateAllFlash.exe
2 -installing the UPFLASH120227.bin with renewflash.exe
3 -Erase the memory with ERASE126.exe
4 -installing the Secret SOLO-120229.bin with secupd111230.exe
5 -installing the cfe_solo_2.0 with a usb pen drive
6 -installing a image XX with the usb pen drive
but nothing help me please

[DOUGALMCD]

Did you use null modem cable and rs232 board with clone?
then you do ic update then bootloader cfe 2.0 then image 1.7.5 or below. HTH

[benny/9]

Good morning to all I ask for help for my vu + clone had only 166 image I discovered later that it was a clone, but now I had purchased I updated the kernel to 3.1.1 then 1.7.6 then also the image but no 1.7 .5 1.7.4 1.7.3 1.7.2 and still nothing does not work now even with the 1.6.6 what should I do? please help thanks
1 -installing the soloboot.bin with UpdateAllFlash.exe
2 -installing the UPFLASH120227.bin with renewflash.exe
3 -Erase the memory with ERASE126.exe
4 -installing the Secret SOLO-120229.bin with secupd111230.exe
5 -installing the cfe_solo_2.0 with a usb pen drive
6 -installing a image XX with the usb pen drive
but nothing help me please

*****************************************
first have you updated the IC with the small rs232 board
and a null modem cable, or does the box have a V2 sticker on it?
to do the update you must use a computer with a fixed 9 pin com port
this rs232 board wont work with a usb to serial convertor.

[moin]

where can i download these files from on this forum

as my vu+solo has red light i will need do follow this but need the tools and files , it is a clone

1 -installing the soloboot.bin with UpdateAllFlash.exe
2 -installing the UPFLASH120227.bin with renewflash.exe
3 -Erase the memory with ERASE126.exe
4 -installing the Secret SOLO-120229.bin with secupd111230.exe
5 -installing the cfe_solo_2.0 with a usb pen drive