All you need is Symantec Ghost and an Enigma 2 image.
This tut works on IPbox 9000HD
The Ghost program and the E2 image is linked at the bottom of this thread.
the image is Enigma2_0.4.2 by Tideglo
The image already has the satellites scanned from 45 east to 45 west and the Language is set to English.
All you need is to replace the incubuscamd.conf with your working one and press blue button to get the cam menu to start it. And change the long and lat to yours.
To install..
To install E2 Ghost image using Symantec Ghost32 8.0
put you USB stick in your PC and format it to fat32, ( i prefer to have 2 gig partitions on mine )
you could use Paragon Partition Manager ( search this forum for it )
open the Ghost programme, which is in the rar file below.
then choose :-
Local > Disk > From Image
point to where the image is that you want to install.
Then choose the USB stick ( usually last option )
The operation will only take a few minutes.
When message says done remove USB stick and put it into your IPbox 9000.
Switch off the box.
re boot it and press and hold the relevant remote control key to boot from USB stick,
Thats if you have multi boot flashed on your image, if not get it here http://www.digital-kaos.co.uk/forums...-9000-a-37129/
-----------------------------------------------------------------
To back up your E2 image.
Put your USB stick in your PC.
Start the Ghost program then ...
Local> Disk> To Image
Select the usb stick and press OK (usually the last in the list)
Select where you want to save the image to, give it a name , and end with .GHO ( example E2.0.4.0.GHO )
A new Window will appear asking if you want to back up your image normal,fast,or high compression
Next the message will be ':
Image Creation Completed Successfully
And given OK
Now you will find the backup of your usb pen in the folder you chose earlier.
Code:
http://rapidshare.com/files/241551894/E2_0.4.2_Ghost.rar
Bookmarks