hi, need please to add this key data for this immo from a Daihatsu Terios 2008, immo 89780-b4020, eeprom 93c66. all key lost.
key data from ID 67
PG1. B2
PG2. 35
PG3. C9 BD 3A 16
DATA STREAM PAG4. 7E 3A BD C9 51 36 C8 12 80 0B
hi, need please to add this key data for this immo from a Daihatsu Terios 2008, immo 89780-b4020, eeprom 93c66. all key lost.
key data from ID 67
PG1. B2
PG2. 35
PG3. C9 BD 3A 16
DATA STREAM PAG4. 7E 3A BD C9 51 36 C8 12 80 0B
mcday (30th March, 2015)
u can add key manual but u must to make ffffff in immo box then turn swetch on 5 time //////////
hi, thanks for answer. FFFFF in all the immo file ?. and then just cycle keys ?, need to do 30 minutes bridge on obd2 ? thanks for your help
mauricio
You must use 4D ID 67 with pg1 52 .
To add new key:
-connect 13 +4 with jumber.
-insert the working key and Ig on, when you note the security flash.
-Switch Ig off then remove working key.
-Insert new key then Ig on, after you note security off.
-switch Ig off, remove jumber and start your car.
Last edited by fadhle; 22nd October, 2014 at 08:56 AM.
llaverosv (22nd October, 2014)
Use the attached file.
Once immo box plugged in, the LED will be solid.
Insert key with pg1 52, if key is recognise it will blink once and then stay solid.
Register 2nd key if you want to, if not cycle key 5 times to close registration.
llaverosv (22nd October, 2014)
nice !!!! i?m on my way will let you know
llaverosv (22nd October, 2014)
<br />
id 67 key 1 master<br />
P1: 52<br />
P2: 4E<br />
P3: C3 98 0B 04<br />
P4: A7 0D B0 E6 8B<br />
<br />
id 67 key 2<br />
P1: 52<br />
P2: 2E<br />
P3: DF 26 BD 16<br />
P4: 3B 5D FC B3 3B<br />
In the event you need the right key data.![]()
llaverosv (25th October, 2014)
How to_record_key again scan_damp.
This is the current topic for me in 2022.10.
508 9HD 1.6 HDI_SID807_BR2 ( 19 Faults )
today Subaru Forester 1999 sync. A pair of H44H and F93C46 is required.
A topic that interests me
EDC16 CP39 need ASAP2, ols, a2l, kp map
I can not find the description .... Lucas EPIC I. II and III
Bllinda, u can use iamfooser posted reset file, write the file. Plug in the immo box, immo light will immediately turn ON. Prepare 2 pcs of Daihatsu keys, insert key 1 into ignition, immo light will turn OFF and ON back again. Pull out key 1, insert 2nd key, immo light will be OFF by then. Test the key to start car.
Note: if you intend to program 1 key only. Insert key and after that turn ignition ON x OFF 5 times. Once immo light goes OFF, you can start the car.
thanks again for your support !!!!
Bookmarks