Mercedes Atego key programming.

**luiscarlo** · 20th May, 2015, 01:15 PM

Please help i have read 93C86 and generated a key and recorded in a T5 with Zed-Bull, but does not start the truck, immo light flashes.
Can someone help me to see if this good or generate another good key.

Thanks in advance.

dumm y key.rar

**KILL_THE_IMMO** · 20th May, 2015, 02:26 PM

USE A VIRGIN CHIP

**luiscarlo** · 20th May, 2015, 02:48 PM

hello KILL_THE_IMMO.
I used a virgin and recorded with T5, Zed-Bull.
but it does not work.
The chip writes me well FF81A48026106F41
but it does not work.
Anyone know what might be happening,

a greeting.

**kemaster** · 20th May, 2015, 03:15 PM

Could be low quality transponder. Did you try another one? Take it out from the key and put it near the antenna coil to test

**luiscarlo** · 20th May, 2015, 03:21 PM

I tried it in the Zed-Bull, and reads it well, and I've also tried with another chip, and does not start and immo light flashes.
The truck was lost all keys, halgien know how it started.

a greeting.

**kemaster** · 20th May, 2015, 04:08 PM

Sorry, may be missunderstanding. I meaned to take it out of key and put it near the truck antenna(not zed bull)

**luiscarlo** · 20th May, 2015, 04:17 PM

Originally Posted by kemaster

Sorry, may be missunderstanding. I meaned to take it out of key and put it near the truck antenna(not zed bull)

hello
I put it in the zed bull and the truck.
The key've made with 93C86 eeprom of ecu.

And I made the chip with zed bull, but does not start and if not, if someone can prove it.

**Bllinda** · 20th May, 2015, 08:47 PM

The key is correct.
T5 ceramic or glass?

there is a second key. PM

Originally Posted by luiscarlo

hello
I put it in the zed bull and the truck.
The key've made with 93C86 eeprom of ecu.

And I made the chip with zed bull, but does not start and if not, if someone can prove it.