I have buy new ecu, must try
need help
now my goal is to buy xp-005
who will help?
I have buy new ecu, must try
Can i read write with ktag?
yes.....just you will need soldier one wire for boot..............gray wire with clip in ktag
all in manual..........
https://www.youtube.com/watch?v=p372QAIbyAs
Last edited by rafal; 9th April, 2020 at 06:05 PM.
need help
now my goal is to buy xp-005
who will help?
Thanks Rafal
Its better with ktag
Now i understand problem, now i use ktag, every file i test say checksum error, only one file work but not correct for this car. I must have correct orginal file with correct checksum.
here set with ori and off
need help
now my goal is to buy xp-005
who will help?
alfons37 (9th April, 2020)
Strange i try your file and it say checksum error, i have 1.4 16v without can with AC
RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.4 16V (B/CB0P) 2001 98Hk
engine code K4J-712
try this one................
need help
now my goal is to buy xp-005
who will help?
It say checksum error, maybe is wrong on my install of ktag
i never had problems with this ecus - i done over 40
need help
now my goal is to buy xp-005
who will help?
alfons37 (9th April, 2020)
Yes, it is very strange with my ktag thanks for your help
Now i try with emulator and same problem, must be bricked ecu.
here immo off black box sirius 32 cut pin 58 and readyacífico:
Bookmarks