Corsa D pin not accepted

[Cromwe11]

Any one got any ideas on this? Corsa D 2007 lost keys. I have correct pin code 5234 but the BCM is not accepting the code when i try to program the new keys. Car had a flat battery when i got to it. 93c86 dump is a attached corsa d pg.rar

[plasma533]

also need nec dump for pin as well.. 93c86 is only one half of solution

[SK Auto]

Any one got any ideas on this? Corsa D 2007 lost keys. I have correct pin code 5234 but the BCM is not accepting the code when i try to program the new keys. Car had a flat battery when i got to it. 93c86 dump is a attached corsa d pg.rar

Can you do a DTC and post

Sent from my SM-G930F using Tapatalk

[rapidlocksmiths]

corsa d on this model also suffers BCM corruption after a flat battery especially if jump leads used . common issue on these after flat battery , some data gets corrupted in bcm. tech 2 needed to rewrite bcm if this .

[Cromwe11]

also need nec dump for pin as well.. 93c86 is only one half of solution

The pin I already have 5234 have it from car pass and also read from car.

[Cromwe11]

Can you do a DTC and post

Sent from my SM-G930F using Tapatalk

Currently not showing any dtc's but only read codes with ad100 pro today will check with something more comprehensive when i go back.

[Cromwe11]

corsa d on this model also suffers BCM corruption after a flat battery especially if jump leads used . common issue on these after flat battery , some data gets corrupted in bcm. tech 2 needed to rewrite bcm if this .

Thanks Martin don't suppose you could give me a quick guide to the procedure? I haven't got Tech2 so not familiar with it, but can set it up on passthrough on my Avdi

[plasma533]

I think they advise to update BCM software first before carrying out a reprogram of the BCM

[tadeo]

If you have old op-com your BCM will accept security code then reset wait 10 min and should work have same issue Beafore and works

Sent from my SM-G935F using Tapatalk

[nazz2]

Follow this procedure from a member.

http://www.digital-kaos.co.uk/forums...a+flat+battery

[Bllinda]

You may still try to enter as well ....
or else can read ipc.dis.uec.rec.ecu

WBR

Bllinda

Any one got any ideas on this? Corsa D 2007 lost keys. I have correct pin code 4325 but the BCM is not accepting the code when i try to program the new keys. Car had a flat battery when i got to it. 93c86 dump is a attached corsa d pg.rar

[mikajna]

Any one got any ideas on this? Corsa D 2007 lost keys. I have correct pin code 5234 but the BCM is not accepting the code when i try to program the new keys. Car had a flat battery when i got to it. 93c86 dump is a attached corsa d pg.rar

Friend I had that problem one month ago, but my car was not losted key situation, I succes to eneter pin code while car was running, not just with ignittion on...maybe you can handle with this if you connect your battery to some car whille running, that will make good conditions for bcm...good luck

[Cromwe11]

Tryed following the procedures. But still no joy if I try to reset the bcm I still get the pin rejected (every other module accepts the pin) both Avdi and op-com show as security wait time active 10mins. But it has been left for hours ignition on with a BSU and no change. I have access to all other modules on the car

[mikajna]

Tryed following the procedures. But still no joy if I try to reset the bcm I still get the pin rejected (every other module accepts the pin) both Avdi and op-com show as security wait time active 10mins. But it has been left for hours ignition on with a BSU and no change. I have access to all other modules on the car

I couldnt connect to bcm with pin code also, finaly when I want to reset bcm, I've try to enter code whille car runinng, and than its finaly accept

[Cromwe11]

I couldnt connect to bcm with pin code also, finaly when I want to reset bcm, I've try to enter code whille car runinng, and than its finaly accept

How would you get the car running when it's immobilised?