Diga problem. BIG Problem

[golf1gti]

Unfortunately you dont live in the neighbourhood
I have a reel of 1400 pieces of those things here

if you need any answers about Diga software or hardware just ask.

Hello samy25
i hope you can help
i have tacho 2008 first problem is the touchkeys are broke.
second problem is normal when you start up the handheld you heard a clivk(relay or somthing inside).
now when you startup i don't heard the click anymore
and also when i want to program dash from peugeot206 (you heard normal also same click when programming dash) its do nothing.
i can program other cars like vw opel.
thanks alot
stefan
the netherlands

[cammy25]

Try to resolder all solder joints (soldeerpunten) near the relay on you motherboard.
Or your relay stay hanging on NC.
Sometimes the relay will click if you slam your diga with your hand (no joke).
This problem is called: Chinese shitty soldering techniques.

[Maxpower50]

[QUOTE = mikac; 323752] Ja. Jeg ?nsker ? f? h?ndboken for ? reparere tachosoft.
(fra Maxpower50)
Takk [/ quote]

Her er den igjen lykke til

[krazylegz]

use english please

[mikac]

Thank's to Maxpower50.. but unfortunatly I can not download from forum. I upload all my details , and still can't download. anyway Thank you Maxpowe50 !!

[mikac]

Hey. I just menage to download pdf file , and it will be at help to me. Thank's a lot.

[zcc]

I need your urgent help. It seems that I have a problem with diga consult main unit. When I connect the power cable I can hear the little tick from the relay and the screen has a light but nothing is displayed. What can I do? Thank you.

[zcc]

I need your urgent help. It seems that I have a problem with diga consult main unit. When I connect the power cable I can hear the little tick from the relay and the screen has a light but nothing is displayed. It's brand new from China and never used!!!. What can I do? Thank you.

[melcool]

i read that you have 1400 pieces maby you vcan help me on a problem.
first my touchpanel is broken.
also i have a problem normal when you startup the tacho 2008 you heard a click inside (relay or somthing)now when you startup you don't heard the click anymore and ican't do also the dash from peugeot 206(you heard also the klick when you program the dash)
i hope you can help me
thanks
stefan
the netherlands

The relay on the motherboard has bad soldering! strengthens soldering on the relay! I had the same problem

[sorinpuv]

you're right cammy25

[Rito]

HI

i have big problem with my tacho universal version 2008

it's never show old km when i'm using 93cxx adapter
in hex editor only 0000

but

i push adjust km it change km ok



with 24c and another adapter is ok

I have same problem, But I never has successful change
I have tried in renault megane 2003 (93c56)

What I can do for correct this??

[drpeter]

Cable is OK, i tested.
I have change 74HC5410 below display (near NEC processor). Same shit.
Ideea is after changing mainboard it's OK. I guess that CPU board is ok.

If OBD2 is not working, the small SMD power transistor is defect, left under lCD screen (I think it was a NPN transistor, check number) I took a normal BD137 for this, not sure long time ago. Measure between 2 legs, if shortcut then transistor defect. If not replace the 74HC04D above the transistor. Once I had a transistor defect and on another diga the 74HC04D.

[Rito]

I wold like know If some people can help how I can put 93Cxx works great.

My Diga (clone) never read 93Cxx and I see in this web site If change one chip can read and write, only 24cxx...

Repair and Update KIT for Tacho Universal / Diga Consult

Some people do it or this not work??
Or exist other solution?

Thanks all

[rsibiza]

I wold like know If some people can help how I can put 93Cxx works great.

My Diga (clone) never read 93Cxx and I see in this web site If change one chip can read and write, only 24cxx...

Repair and Update KIT for Tacho Universal / Diga Consult

Some people do it or this not work??
Or exist other solution?

Thanks all

Hi m8.

Could you please be more clear? You wanna write 93xx?
What dash? Make car?year?

Do the manual show that diga should show old km? If yes,and diga does not show actual value,dont touch.

Diga shows old value,change.

Regards.

[Rito]

For example in renault clio or megane my diga says: (general faul read)

I can?t read any 93Cxx of course can?t write.

I see in this web site which have solution for this problem.

Repair and Update KIT for Tacho Universal / Diga Consult

You understand?

Thanks