What engine? (xxx xxx)
How did this happen?
Hello to all Members,
can you please help, I need direction/help to fix no start problem - Renault x70 Master 2007
error code P062F "ECU EEPROM error", also other error code P0380 Glow Plug/Heater circuit, check engine light on.
any advise greatly appreciated. Thank You
Last edited by wosi0; 15th July, 2019 at 06:13 AM.
What engine? (xxx xxx)
How did this happen?
This is the current topic for me in 2022.10.
508 9HD 1.6 HDI_SID807_BR2 ( 19 Faults )
today Subaru Forester 1999 sync. A pair of H44H and F93C46 is required.
A topic that interests me
EDC16 CP39 need ASAP2, ols, a2l, kp map
I can not find the description .... Lucas EPIC I. II and III
wosi0 (15th July, 2019)
Thank you for prompt reply,
Engine is 4 cyl 2.5 l G9UA650, I bought this van with this problem thinking will replace ECM and should be ok
but not so easy, I have done some google research and looks like need some programming ? advise greatly appreciated. Thank You
Hi,
This should be the famous BOSCH EDC16XXX! Anyway, if ECM is brand new from Renault shop it is sold without sofware, it must be connected to CAN CLIP with DVD Reprog.
If it is used part it must be clear immo done prior to be used on another car.
Greetings,
Ok,
1. To start the van I need ECM -the same part number.
2. I will use second hand ecm and just need clear immobilizer.
3. I will try to read eprom and post the dump here hopefully someone will able to clear immobilizer
4. Van should start, or is that more to it ?
Thanks
Hi,
That's wright! You'll need to write the injectors codes.
wosi0 (15th July, 2019)
Thanks to all..........
Bookmarks