peetr (16th October, 2018)
peetr,
yeah, I'd appreciate if you could devote some time/effor for the same overnight test run just with English version..
Your bench setup looks nice. It's small but neat. I'd like to build something similar for myself. Unfortunately, local junk yards here are asking no less than 30 Euros for anything what contains electronics inside. So add a CAN GW and some random modules and you get over 100 euros total price.
Meanwhile I'll stick to testing on real cars. Yeah, I know, it's complicated and very exhausting (going back and forth, hooking up the battery charger, etc) but....
I can calculate ABS module codings for:
* Continental/Teves MK60EC1 and MK60;
* TRW systems in Passat B6 / B7 / CC /Tiguan;
* MK100;
* Bosch ABS8.2, ABS9.0 and ESP8.2, ESP9.0;
* EBC 460 (UP!, Mii, Rapid, CitiGo, Fabia, Toledo, etc) New!
* ... and other VW/Audi/Seat/Skoda modules.I can assist with repairing \/CDS interfaces.
peetr (16th October, 2018)
Hi,
i have a hex v2 from obd2cartool with Atmega 162. The software is 18.2.1 but can i update too 18.9 too?
Here are the details from device:
1. Four-layer circuit board, high quality Components
2. VAG/VCDS HEX-V2 with FT232RQ + 16V8B + ATMEGA162
3. Dual 9241 chip ensures K-line communication stability
4. obd2cartool Exclusive CAN-FD (5M) , VAG/VCDS HEX-V2 support 5M baud rate communication
Thanks
Sound.s like a comercial spot...!!!
Aniway
You can update to 18.9.0 ...
First open it an look for Atmega162...you have it? Ok...let.s goo
Use kolimer.s zip and info.pdf
Try first by usb...and if it is not working, buy an UsbAsp programmer and come back for new steps....
LOL. Guys!
Obd2CT is a trusted source for quality hardware, it has been discussed numerous of times. Yeah, 5M baud rate is marketing thing (actually it's not faster than conventional intterface in real life) but that's what drives the sales....
All their cables come with bootloader enabled - no need to open up the case. Just use WriteLang and be done with that.
I can calculate ABS module codings for:
* Continental/Teves MK60EC1 and MK60;
* TRW systems in Passat B6 / B7 / CC /Tiguan;
* MK100;
* Bosch ABS8.2, ABS9.0 and ESP8.2, ESP9.0;
* EBC 460 (UP!, Mii, Rapid, CitiGo, Fabia, Toledo, etc) New!
* ... and other VW/Audi/Seat/Skoda modules.I can assist with repairing \/CDS interfaces.
Italian installers needed: 17.8.1, 18.2.1. Installers what i have, not work.
Last edited by liviudiaconu; 16th October, 2018 at 07:22 PM.
MacNB - You'll be fine. Bought mine from there and on receipt loaded Kolimer 6.3 using USB only and worked perfectly. Have since updated to 18.9 using Kolimer 7.0 and again absolutely no issues.
Last edited by muscles1960; 17th October, 2018 at 08:40 PM.
Try this version and report: https://dropmefiles.com/y3532
18.2.1 the same error..
And for 17.8.1 after launch the vcds.exe the HDD mark a few activity, nothing happend because VCDS.exe not appear on screen but, even i have 127.0.0.1 ross-tech.com and 127.0.0.1 www.ross-tech.com in hosts, and until now the RT page not launch (cannot display this page), now the page www.ross-tech.com is launched.
Last edited by liviudiaconu; 18th October, 2018 at 01:18 PM.
I have some feedback about 18.2.0 eng and 18.9 eng.
It looks like with 18.2.0 longcodding was not saved (can gateway-Tiguan), updating the same cable (hex v2 ) with 18.9 things are ok with long codding.
Hello, i have a 16.8 version, locked.
Is there a way to unlock it?
Locked ...? In the closed? just kidding..
Do what every one does overhere....show us pcb pics , info about main cip.Atmega Nec Arm....and you get a straight answer
kaalis (18th October, 2018)
Here´s a pic of my hardware
IMAG1135.jpg
Yes, read this topic page by page backwards, find loader v7.0 and do it.
Bookmarks