Beginer needs help with technomate 6800hd

**.: JaCkPoT :.** · 20th December, 2008, 05:11 PM

can i ask.... how is your setup now???? is it all working fine??

**mooreand** · 20th December, 2008, 05:49 PM

The setup is working fine, find channels set up, favorites etc a little long winded, Also had loads of transponders missing, still need to go through the sats programs as still finding channels missing, but now go to king of sat and then use advance search fuction. is there a way of downloading a database of transponders that are active to the receiver from a current list anywhere.

thanks

**staplestown** · 29th September, 2009, 03:35 PM

patch on desk top/ can i down load this to memory stick and then connect to 6800hd box?
thanks .staplestown

**staplestown** · 29th September, 2009, 03:39 PM

hi i have patch on desk top can i down load to memory stick then connect to 6800box

**dick b** · 30th September, 2009, 02:58 PM

Originally Posted by staplestown

hi i have patch on desk top can i down load to memory stick then connect to 6800box

you must extract (unzip) file 1st then yes you load onto stick put stick in the tm6800HD go to usb in menu and then data.
I have posted patch & soft cam if thats any help. patch 1st then softcam.the patch is for tm6800HD original not super

**SIRIPALA** · 7th October, 2009, 10:13 PM

I CANT GET ITV ,IT2 ,BBC.FILM4 CHANNELS ON MY TM6900.I GOT MOTORISED DISH 1.1 M.
ALL OTHER SATELLITE I MANAGE TO GET CORRECTLY.
STRUGLING WITH ASTRA 19,28.2,.......ECT

SORRY FOR THE CAPS.NEXT TIME I WONT
HELP PLZ

**dick b** · 8th October, 2009, 02:29 PM

Originally Posted by SIRIPALA

I CANT GET ITV ,IT2 ,BBC.FILM4 CHANNELS ON MY TM6900.I GOT MOTORISED DISH 1.1 M.
ALL OTHER SATELLITE I MANAGE TO GET CORRECTLY.
STRUGLING WITH ASTRA 19,28.2,.......ECT

SORRY FOR THE CAPS.NEXT TIME I WONT
HELP PLZ

with a 1.1 dish you should not be struggling with much,astra 1 @ 19.2E is an easy sat to receive.as to 28.2E you should have no problem at all,if a re-scan does not fix it I"d check your motor installation is correct,pole plumb,latitude correct on motor,latitude and longitude correct on STB,etc.,

**john777** · 20th October, 2009, 01:13 PM

Originally Posted by dick b

you must extract (unzip) file 1st then yes you load onto stick put stick in the tm6800HD go to usb in menu and then data.
I have posted patch & soft cam if thats any help. patch 1st then softcam.the patch is for tm6800HD original not super

I had a similar problem as staplestown. I tried your files and
all is ok now . box is TM6800HD

Thanks again john777

**noorbawa3** · 21st December, 2010, 06:50 PM

thanks very much mate

**AfyB** · 2nd January, 2011, 09:57 PM

Originally Posted by .: JaCkPoT :.

Im technomate addict. Ask me any questions and i shall answer. Willin to give you as much info as you need.

Hi mate i would appreciate it if you could get back to me with regards to the 6800HD TechMate. I am in two minds whether to buy the 500 as i have done a bit of research on it but if i got the 6800HD at least i can view HD. If you can guide me through software installation i am onto a winner.