CARPROG FULL

**dragonul** · 1st July, 2013, 04:34 AM

hi,
I have a problem with carprog not want to write 95 160 you can help me.

**paulocesar** · 2nd July, 2013, 03:15 PM

tks my friend

**antwnhszr** · 2nd July, 2013, 05:29 PM

hello again guy'si chainge all 74hc125d but still no read 24cxxx....anyone know something?
thank you....

**hhp** · 4th July, 2013, 08:42 PM

Originally Posted by dragonul

hi,
I have a problem with carprog not want to write 95 160 you can help me.

I had the same problem after repair works and GND on the PCB. Now reads and writes 95160

**schumy1502** · 5th July, 2013, 05:44 AM

i try to change km on dash octavia my2007 with maxidot and i have message unknown version or immo active even the dash is in the car or on the table
with carprog 4.01 clone
have anyone solution to do the dash with carprog?
anyone dont have a solution?

**lupu_sandu** · 5th July, 2013, 06:03 AM

Do you have working key?

**Min2xx** · 5th July, 2013, 06:19 AM

Originally Posted by schumy1502

i try to change km on dash octavia my2007 with maxidot and i have message unknown version or immo active even the dash is in the car or on the table
with carprog 4.01 clone
have anyone solution to do the dash with carprog?
anyone dont have a solution?

Do like Passat or Golf

**u.s** · 5th July, 2013, 11:13 AM

just looking on Mr Wangs' site and the 4.74 with dongle costs more than the 4.74/5.31 without dongle ???

**schumy1502** · 7th July, 2013, 07:08 AM

@lupu_sandu i have working key
@Min2xx i have tryed with passat or golf ...but on the table without valid key and dont worked

**paulocesar** · 19th July, 2013, 09:07 PM

CARPROG 5.77... tried today to reprogram Fusion 2012! Not done .... spoke to sync error ..... When not sync error ... did not remove the three resistors cable A1 has something Haver