help with my openbox s6000hd

[mahrkpat]

​​The openbox s6000 is a vu solo clone and recovery is same as installing new image here is a tutorial I did on another forum:


How to load new images to Openbox 6000 HD

What you need:
1.Download the image of your choice eg openpli, vix, blackhole etc..
2.A USB stick formatted to FAT32

Method:
1.Open the rar/zipped folder that you downloaded (some people forget)
2.You will see vuplus folder move it completely to USB stick
3.Power off your box then plug in USB stick in to the USB port of your box
4.Power on your box and wait your image will be updated (about 1 to 3 mins)
5.Pinky light on front of box means updating image
6.After 40 to 50 secs light will go red meaning formatting flash
7.Light goes pinky again meaning writing to flash
8.Once complete you will see flashing blue light
9.You have finished power Off box remove USB stick

You can switch power on your box now with your new installed image

[DW190]

​​The openbox s6000 is a vu solo clone and recovery is same as installing new image here is a tutorial I did on another forum:

How to load new images to Openbox 6000 HD

What you need:
1.Download the image of your choice eg openpli, vix, blackhole etc..
2.A USB stick formatted to FAT32

Method:
1.Open the rar/zipped folder that you downloaded (some people forget)
2.You will see vuplus folder move it completely to USB stick
3.Power off your box then plug in USB stick in to the USB port of your box
4.Power on your box and wait your image will be updated (about 1 to 3 mins)
5.Pinky light on front of box means updating image
6.After 40 to 50 secs light will go red meaning formatting flash
7.Light goes pinky again meaning writing to flash
8.Once complete you will see flashing blue light
9.You have finished power Off box remove USB stick

You can switch power on your box now with your new installed image
e

Unreadable if using Original/Default Style interface