SMOK UHDS Interface and Win7 64 bit

[yugo45]

Uninstall the driver and scan for hardware changes, when driver is to be asked, specify driver location and then when installing driver, select ok to install when it says driver is not digitally signed. Restart your pc, everything should be alright.

I try this but same thing.
I took video so you can see what is going on:

https://mega.co.nz/#!405AXAAK!yIz0-V...nquQDYlqw5uUq4

[kumistheru]

I try this but same thing.
I took video so you can see what is going on:

https://mega.co.nz/#!405AXAAK!yIz0-V...nquQDYlqw5uUq4

Checked your video. What you have missed is, deleting the driver software permanently from the windows. When you remove the driver, you need to select checkbox "Delete the driver software for the device" and say "OK". Once you have done that and scan for hardware changes, it will not install the driver software automatically as per your video. Then you can locate the driver software from the folder and then re-install even with the one that has not digitally signed. Job is done.

Hope this helps.