Condor XC007 Who's got one?

[dustin2014]

please show a bigger picture.

also a few people have said he same issue as me, it is in the correct position - if you rotate the other way it would cut the other side too much also.

The only difference could be the cutter - I do not see anywhere where you sell the cutter made for the condor - please post a decent picture of the cutter and where to buy the same cutter as you

Do you mean the proper 1.5mm & 2.5 mm cutters?

[paul_12345]

Do you mean the proper 1.5mm & 2.5 mm cutters?

you can not use 1.5mm as they haven't programmed it to do 2 passes to cut the correct 2.2mm width.

2.5 is just too big even if it works I dont want some ugly key.

I think they said it works ok with 2mm but I want a picture of the key cut with the condor and details of the cutter that cut it so I can test it.

[dustin2014]

Gotcha mate.