VAG-COM/VCDS EVERYTHING

**Mario6** · 16th April, 2019, 01:22 PM

I bought from OBD2cartool 3 vcd$ interfaces. One very very recently. The first came after 18 days. He worked well. I have updated it from 18.2.0 to 18.9.0. The only minus is a very hard usb cable. I am waiting for the second 33 days. I do not know how long I will be waiting for the third.

I also had many cables from aliexpres and they all worked. I think the basis is a good job, not a look.

I use a cable from aliexpres, bought in 2016 as 16.8.3. Works with 18.9.0 AKP/EN and with 18.9.1EN.

Thanks bg17aw

**Roma77** · 16th April, 2019, 02:40 PM

Originally Posted by Mario6

I bought from OBD2cartool 3 vcd$ interfaces. One very very recently. The first came after 18 days. He worked well. I have updated it from 18.2.0 to 18.9.0. The only minus is a very hard usb cable. I am waiting for the second 33 days. I do not know how long I will be waiting for the third. I also had many cables from aliexpres and they all worked. I think the basis is a good job, not a look.

I agree, the appearance does not matter if the circuitry of the board and the components and soldering are done qualitatively, the board can be shoved into the cardboard box and it will work, but you see users complaining that Ali has recently sold a lot of boards with poor-quality components and bad circuitry and loudly calling it V2

In my opinion, creating these two products for our forum OBD2cartool has made the best offers on the market in terms of price - quality, support, warranty.

**Mario6** · 16th April, 2019, 03:16 PM

Yes it's true. It's hard to buy equipment that is compatible with the description on aliexpres. Earlier, I saw on the aliexpress site with a large price informing about the differences between HEX-CAN and Hex V2.

https://www.aliexpress.com/item/VCDS...AbTest=ae803_3

Another example is OP COM for Opel. All reportedly have a PIC 18F458 chip but few of them support FW change. Just lottery.

**bg17aw** · 16th April, 2019, 07:58 PM

Originally Posted by Mario6

I am waiting for the second 33 days. I do not know how long I will be waiting for the third.

so no tracking number at obd2ct?

I ordered mine yesterday, no shipping info yet. Hope to get it sooner than the one I ordered from Ali though, this was the reason I ordered it (people saying obd2 delivers in about 15-20 days)

**alexm1** · 16th April, 2019, 08:08 PM

In a few days you will see on Status section- will apear track nr ; about time delivery, I never get my package, earlier than 35 days, but there are a lot of causes that can prolong delivery time.

**Mario6** · 16th April, 2019, 08:42 PM

I have this information about the shipment.

03/13/2019

Delivered

Hello, dear customer, thank you for shopping with us. your tracking number is VR057xxxxx5YP , you can check on http://www.yw56.com.cn/, it should take 7-45 business days to reach your destination. if you have any quesion welcome contact with skype: great2obd, After sell service: obd2cartool@outlook.com . thnx.^_^ Regards from www.obd2cartool.com

**Roma77** · 17th April, 2019, 05:46 AM

I do not know who I ordered twice, both parcels came in 12 days. Probably, someone also depends on the destination country. The third is on the way for 13 days, but I know that from April 5 to 7 there were weekend 3 days in China (Memorial Day of the Dead), please consider not only the weekend in your country, but also in the country of the sender, the store will process and send the order within 2-3 days and then everything depends on the carrier in different countries; different schedules for sending mail to one country can be 10 flights to another only 2 per month if the parcel arrived just in time for sending to your country quickly or waiting for the next flight.
P.S. Do not hesitate to indicate your country in the profile on our forum - be proud of your country.

**predki** · 17th April, 2019, 06:12 AM

Hello, I have a problem with vcds. the system can not see it. pid and vid 0000. How do you fix it, go back to ftkabel.jpg

**Roma77** · 17th April, 2019, 06:21 AM

Originally Posted by predki

Hello, I have a problem with vcds. the system can not see it. pid and vid 0000. How do you fix it, go back to ftkabel.jpg

With the help of this set and pictures, you can restore it, I had to do it several times, everything will be fine if you create the instructions correctly.

**Mario6** · 17th April, 2019, 07:28 AM

predki

You can try this too. EPT take from V 7.2.

**Jerak** · 17th April, 2019, 07:58 PM

My USBasp came yesterday and my VCDS 17.1 is updated to 18.2.0 x64.

Is there any way to remove the software out of date popup?

It is not too important, i am just asking.

**predki** · 17th April, 2019, 08:41 PM

It does not go as you wrote colleagues. all the time a problem. You can not run this device code 10 .Windows do not want pid and vid 0000 a little strange should be some other numbers?