Pcr 2.1

**Stopro92** · 3rd May, 2019, 08:26 PM

Hi, I need to read the driver 2.1 driver tomorrow. I have a galetto, do I need to first unlock it to the flash? Can I do it after reading, or could any of you unlock it if I put it here?

**filez79** · 3rd May, 2019, 08:49 PM

you must first unlock it and then read and write.

**Stopro92** · 3rd May, 2019, 08:53 PM

Do you have the instructions to unlock and to connect the driver?

**filez79** · 3rd May, 2019, 09:06 PM

all in the manual galetto

**Stopro92** · 3rd May, 2019, 09:30 PM

One more question, after unlocking the reading by obd works?

**ruslan.v** · 3rd May, 2019, 09:34 PM

Hello,

By galetto you have to open ECU to unlock. When you use MagPro or AT opening is not necessary.

**Stopro92** · 3rd May, 2019, 09:35 PM

Unfortunately, I do not have this device

**ruslan.v** · 3rd May, 2019, 09:41 PM

Ok. You said that you need only read, so reading flash is possible by obd. Only writing is secured (unlock needed).

**Stopro92** · 3rd May, 2019, 09:46 PM

I will need to turn off the egr, so the save will be needed too

**carmoh** · 3rd May, 2019, 09:50 PM

post your dump here (eprom)

**Stopro92** · 3rd May, 2019, 10:08 PM

I will read it tomorrow

**filez79** · 4th May, 2019, 06:55 AM

Originally Posted by Stopro92

One more question, after unlocking the reading by obd works?

Yes,works.

**Stopro92** · 4th May, 2019, 11:44 AM

why my galletto does not show if ecu is locked?

read galetto.jpg

**dtip** · 4th May, 2019, 12:09 PM

Originally Posted by filez79

you must first unlock it and then read and write.

first of all this is not true, you need to unlock it for writing, not reading

**Stopro92** · 4th May, 2019, 12:20 PM

Yes, I know unlocked showed Unlock - ok, but still does not show in the read whether it is unlock. I uploaded the file https://www.digital-kaos.co.uk/forum...81#post3567881

Second question, if I unlocked it once it will be always unlocked?