Hello, almighty gury of this forum, the poeple who know how to connect segger jlink
i connected all wires as shown in the schematic to my chinees segger
and this is what i am getting
- Device "ARM9" selected.
- Target interface speed: 12000 kHz (Fixed)
- VTarget = 3.341V
- TotalIRLen = ?, IRPrint = 0x..000000000000000000000000
- Failed to identify target. Resetting via Reset pin and trying again.
- TotalIRLen = ?, IRPrint = 0x..000000000000000000000000
- Executing init sequence ...
- ERROR: Could not perform target reset
- ERROR: Failed to connect.
Could not perform custom init sequence.
- ERROR: Connect failed
WARNING: No data file specified!
Reading entire flash chip ...
- Connecting ...
- ERROR: Failed to connect.
Could not perform custom init sequence.
- ERROR: Connect failed
- ERROR: Could not read target memory, not connected
can anybody tell my monkey whay he needs to do to fix this to read the dump.
Results 1 to 8 of 8
Thread: CM0051 Segger problems
-
19th August, 2024, 07:48 PM #1Newbie
- Join Date
- Mar 2017
- Posts
- 8
- Thanks
- 2
- Thanks
- 1
- Thanked in
- 1 Post
CM0051 Segger problems
-
19th August, 2024, 07:58 PM #2Banned
- Join Date
- Feb 2010
- Location
- WALES
- Posts
- 25,760
- Thanks
- 41,116
- Thanks
- 46,305
- Thanked in
- 17,234 Posts
Did you power the radio?
Originally Posted by BJORN69
Hello, almighty gury of this forum, the poeple who know how to connect segger jlink
i connected all wires as shown in the schematic to my chinees segger
and this is what i am getting
- Device "ARM9" selected.
- Target interface speed: 12000 kHz (Fixed)
- VTarget = 3.341V
- TotalIRLen = ?, IRPrint = 0x..000000000000000000000000
- Failed to identify target. Resetting via Reset pin and trying again.
- TotalIRLen = ?, IRPrint = 0x..000000000000000000000000
- Executing init sequence ...
- ERROR: Could not perform target reset
- ERROR: Failed to connect.
Could not perform custom init sequence.
- ERROR: Connect failed
WARNING: No data file specified!
Reading entire flash chip ...
- Connecting ...
- ERROR: Failed to connect.
Could not perform custom init sequence.
- ERROR: Connect failed
- ERROR: Could not read target memory, not connected
can anybody tell my monkey whay he needs to do to fix this to read the dump.
wbr
-
The Following User Says Thank You to shooting For This Useful Post:
BJORN69 (19th August, 2024)
-
19th August, 2024, 08:23 PM #3Newbie
- Join Date
- Mar 2017
- Posts
- 8
- Thanks
- 2
- Thanks
- 1
- Thanked in
- 1 Post
yes with 12v
-
19th August, 2024, 08:25 PM #4Banned
- Join Date
- Feb 2010
- Location
- WALES
- Posts
- 25,760
- Thanks
- 41,116
- Thanks
- 46,305
- Thanked in
- 17,234 Posts
Under "Help/Licences" what is showing? Originally Posted by BJORN69
wbr
-
The Following User Says Thank You to shooting For This Useful Post:
BJORN69 (19th August, 2024)
-
19th August, 2024, 08:49 PM #5Newbie
- Join Date
- Mar 2017
- Posts
- 8
- Thanks
- 2
- Thanks
- 1
- Thanked in
- 1 Post
not much
-
20th August, 2024, 08:35 AM #6Banned
- Join Date
- Feb 2010
- Location
- WALES
- Posts
- 25,760
- Thanks
- 41,116
- Thanks
- 46,305
- Thanked in
- 17,234 Posts
Is the box empty? Originally Posted by BJORN69
not much
wbr
-
21st August, 2024, 01:46 PM #7Newbie
- Join Date
- Mar 2017
- Posts
- 8
- Thanks
- 2
- Thanks
- 1
- Thanked in
- 1 Post
yes, no licences
-
21st August, 2024, 03:18 PM #8Banned
- Join Date
- Feb 2010
- Location
- WALES
- Posts
- 25,760
- Thanks
- 41,116
- Thanks
- 46,305
- Thanked in
- 17,234 Posts
Click "Help/Licences" then click "Display serial number" Originally Posted by BJORN69
yes, no licences
Then PM me your serial and I'll create new licences for you.
wbr
Reply With Quote
Bookmarks