FG Tech Galletto 2

[z786]

lol dat means im getting a REALLY good deal

[coolis]

lol dat means im getting a REALLY good deal

Can you tell us too..

[z786]

700 euro v51

[coolis]

700 euro v51

Where, can you tell PM

[cezarycezary8]

239 $
Quality B+ Super FGTech Galletto 2 Master EOBD2 FG TECH EOBDII chip tuning V50 system PROGRAMMING with BDM FUNCTION-in Code Readers & Scan Tools from Automobiles & Motorcycles on Aliexpress.com (http://www.aliexpress.com/product-fm/620638421-Quality-B-Super-FGTech-Galletto-2-Master-EOBD2-FG-TECH-EOBDII-chip-tuning-V50-system-PROGRAMMING-wholesalers.html)

[radsky]

239 $
Quality B+ Super FGTech Galletto 2 Master EOBD2 FG TECH EOBDII chip tuning V50 system PROGRAMMING with BDM FUNCTION-in Code Readers & Scan Tools from Automobiles & Motorcycles on Aliexpress.com (http://www.aliexpress.com/product-fm/620638421-Quality-B-Super-FGTech-Galletto-2-Master-EOBD2-FG-TECH-EOBDII-chip-tuning-V50-system-PROGRAMMING-wholesalers.html)

Quality B+ lol i asked my supplier for this and he told me that Quality B+ means returned units from unhappy customers :laugh:

[melcool]

Can someone put here Galletto2 cracked software that work with clones EU or China without dongle or key-
hw

[cezarycezary8]

Quality B+ lol i asked my supplier for this and he told me that Quality B+ means returned units from unhappy customers :laugh:

who is your supplier?

[cezarycezary8]

Quality B+ lol i asked my supplier for this and he told me that Quality B+ means returned units from unhappy customers :laugh:

who is your supplier? does he selling this?

[youk]

bdm ok, with my galletto2

bosch edc16u1 vw

"Galletto2 clone FIX"

http://img15.hostingpics.net/pics/764582Sanstitre.jpg (http://www.hostingpics.net)

http://img15.hostingpics.net/pics/738725HPIM3895s.jpg (http://www.hostingpics.net)

[radsky]

bdm ok, with my galletto2

bosch edc16u1 vw

"Galletto2 clone FIX"



great pictures, wonderful table ... but where is the FIX ? Can you share the magic recipe ?

[youk]

https://rapidshare.com/files/3932370294/Galletto2_clone_FIX.rar

[xtreem]

https://rapidshare.com/files/3932370294/Galletto2_clone_FIX.rar


this fixe is valid for silver box?

[furburger]

with my eu clone v48
have read and write MS6.3 and EDC with ecu pins
all perfet

Can you tell me where to get pinouts for connecting ? And was it iveco ?

[cezarycezary8]

edc 16 is easy to read and write, what about the siemens or marelli, continental?

[adikk]

https://rapidshare.com/files/3932370294/Galletto2_clone_FIX.rar
May be You have photo of original PCB because original part list diferents of green PCB V51

[straki007]

Has anyone tried to do MM48P2 PSA concern with this tool?

FGTech Galletto 2-Master 11.9 V BDM-TriCore-OBD (http://ecutool.com/FGTech-Galletto-2-Master-V51-BDM-TriCore-OBD_10038.html)

[youk]

edc 16 is easy to read and write, what about the siemens or marelli, continental?

test bdm no ok with sid803a psa

[minchion]

Has anyone tried to do MM48P2 PSA concern with this tool?

FGTech Galletto 2-Master 11.9 V BDM-TriCore-OBD (http://ecutool.com/FGTech-Galletto-2-Master-V51-BDM-TriCore-OBD_10038.html)
They say Quality "A" V51 hardware, anyone tried this tool ? is it really V 51 or is just cracked software shows that, in pictures is HW 48

[elchip]

test bdm no ok with sid803a psa
U get FGtech-2 FIX from china saler and for info SID803 is OK with clone FG 100%.

[ipejasinovic]

Has anyone tried to do MM48P2 PSA concern with this tool?

FGTech Galletto 2-Master 11.9 V BDM-TriCore-OBD (http://ecutool.com/FGTech-Galletto-2-Master-V51-BDM-TriCore-OBD_10038.html)
11,9v hardware version?! Ahahahhahahaha. OMG. This is proof that Chinese don't know anything about tools. They only resell and to them everything is working...

[minchion]

You right ipejasinovic
http://www.ecutool.com/proimg/FGTech-Galletto-2-Master-V51_3514026_c.jpg

[eprommazza]

11,9 are the voltage not version..
V50 best work perfect i tested all bdm marelli siemens bosch delphi
work perfect also boot mode tricore i tested
work perfect in the obd ....

this my advise quality/price

best regards

[minchion]

11,9 are the voltage not version..
...this my advise quality/price

best regards
yes we see that, it was about chinese resellers...!!
do you have this version eprommazza ?

[eprommazza]

yes we see that, it was about chinese resellers...!!
do you have this version eprommazza ?

i have v50 silver work all perfect
the repeated many times

br

[tagar]

i have v50 silver work all perfect
the repeated many times

br

there are black and silver boxes...


is this what you mean by v50 silver?

FGTech Galletto 2-Master - $259.00 : go car diagnostic , scanner , car , auto scanner, car diagnose, diagnostic tools (http://www.gocardiag.com/index.php?main_page=product_info&cPath=66&products_id=554&zenid=7cfc807e079e4294230e376dc9db6ebd)

[eprommazza]

there are black and silver boxes...


is this what you mean by v50 silver?

FGTech Galletto 2-Master - $259.00 : go car diagnostic , scanner , car , auto scanner, car diagnose, diagnostic tools (http://www.gocardiag.com/index.php?main_page=product_info&cPath=66&products_id=554&zenid=7cfc807e079e4294230e376dc9db6ebd)

yes silver and black pcb green and black v50 i have 2 version
work perfect

br

[tagar]

11,9v hardware version?! Ahahahhahahaha. OMG. This is proof that Chinese don't know anything about tools. They only resell and to them everything is working...

i chatted with uobd and they admitted they made a mistake on the photo. It is the volts reading. Their latest model it was claimed to be V51 on SE61B product code.

[bearheroes]

i also have silver box v.50 and it seems to work good until now.I'll try to read Mini MEV17.2 and i'll inform you.

[tagar]

i also have silver box v.50 and it seems to work good until now.I'll try to read Mini MEV17.2 and i'll inform you.


your silver box can do bdm?

uobd says they have three product code...
SE61 no BDM
SE61B with BDM, V51 (latest)
SE61C with BDM, V50

[camil]

lol now even cheaper :)

FGTech Galletto 2-Master B - $199.00 : go car diagnostic , scanner , car , auto scanner, car diagnose, diagnostic tools (http://www.gocardiag.com/index.php?main_page=product_info&cPath=66&products_id=676)

[8k65m]

After buying from Jo troubled CarProg I don't trust his price.

[TheBadFrog]

Hi,

how much are shipping costs at this low prices???

Best regards

TheBadFrog

[deusbrest]

lol now even cheaper :)

FGTech Galletto 2-Master B - $199.00 : go car diagnostic , scanner , car , auto scanner, car diagnose, diagnostic tools (http://www.gocardiag.com/index.php?main_page=product_info&cPath=66&products_id=676)

Hardware: 11.9V lol

[TheBadFrog]

Yes they don?t know, what they sell!

TheBadFrog

[robert54]

Nice tool,Very easy to change version from 11.9V to 220V
Info PM :laugh:

[camil]

Hardware: 11.9V lol

Ufff very difficult to repair the voltage bug, already explained in this thread, just change a resistor and bug gone. :)

Another issue can be the "BDM" but i bet it can be solved too :)

[poxxxy]

Can someone help me in locating a reliable galletto 2 clone and bdm frame? Would really appreciate it!

[eprommazza]

The Chinese showed 11.9 v to make it clear that now the power is good!
It is normal for all sellers Europeans are angry for their beseness

[wiseman]

Anyone tested this yet? http://www.gocardiag.com/index.php?main_page=product_info&cPath=66&products_id=677&zenid=253a394ce9ad6c658b9fbe6c36951166

[jr2185]

Anyone tested this yet? FGTech Galletto 2 V51 BDM-TriCore-OBD - $317.00 : go car diagnostic , scanner , car , auto scanner, car diagnose, diagnostic tools (http://www.gocardiag.com/index.php?main_page=product_info&cPath=66&products_id=677&zenid=253a394ce9ad6c658b9fbe6c36951166)
Yes. I sent it back because only bdm worked.

[Overtune]

i have v50 silver work all perfect
the repeated many times

br

Have you tested marelli IAW 4MV via obd?
Have you tested bosch med17.5 tc1766 via obd?
If yes and worked ok, then i had a bad silver box and green pcb...

[eprommazza]

Have you tested marelli IAW 4MV via obd?
Have you tested bosch med17.5 tc1766 via obd?
If yes and worked ok, then i had a bad silver box and green pcb...

edc17 obd ok edc17 boot mode ok edc16 bdm ok obd also ok
i try more never failed ...
not try mev17 not try 4mv
sorry can t try all
when have it try sure
best regards

[TheBadFrog]

Hi Colleagues,

here are so many info?s about the Galletto 2 Clone.
In short words

at the moment are 3 types available.

Silver and black housing...with green an black PCB

One with black housing and LED?s it?s looks well..........

All have problems..........
some with the dongle, other can?t do BDM, other with the shown voltage.....
Here are some fixes for the FTDI Chip, but can i use than original soft?

Which one ist the best at the moment, or say it in this way with less problems!!!

Prices are going down and down....... is it because a new hardware will appear?

Best regards

TheBadFrog

[bearheroes]

your silver box can do bdm?

uobd says they have three product code...
SE61 no BDM
SE61B with BDM, V51 (latest)
SE61C with BDM, V50
No tested with BDM.

[bearheroes]

Just tested in Mini R56 - MEV17.2 via OBD.
It seems that worked perfect.

[theghost]

hi,

does this china gal really make jtag -> if yes it must have FW53?

Aliexpress.com : Buy 2012 New arrivde FGtech galletto 2 master from Reliable FGtech galletto suppliers on Alansh Techonology Limited Company (http://www.aliexpress.com/store/product/2012-New-arrivde-FGtech-galletto-2-master/315241_578468839.html)

br

[minchion]

hi,

does this china gal really make jtag -> if yes it must have FW53?

Aliexpress.com : Buy 2012 New arrivde FGtech galletto 2 master from Reliable FGtech galletto suppliers on Alansh Techonology Limited Company (http://www.aliexpress.com/store/product/2012-New-arrivde-FGtech-galletto-2-master/315241_578468839.html)

br

I don't think it's V53 HW, there is a coloured cable on the original for jtag connection

http://www.fgtechnology.it/IMG_PROGRAMMA/esempio_jtag.jpg

[wiseman]

Yes. I sent it back because only bdm worked.

Absolutely nothing else worked? Hmmm Has anyone else tried v51?

[3abas27]

edc17 obd ok edc17 boot mode ok edc16 bdm ok obd also ok
i try more never failed ...
not try mev17 not try 4mv
sorry can t try all
when have it try sure
best regards
i tested bdm function on edc 16 not work all well
i tested on vw edc16 good on bmw year 203 good but on 2005 not good bdm 100 do them easily
who can prove that marelli and siemens work ? i try with siemens sid 206 with no sucees

[jr2185]

Absolutely nothing else worked? Hmmm Has anyone else tried v51?

I only tested on a few ecus from iveco and john deere. Iveco on k-line it only id one, the other Iveco nothing.
John Deere on can could read ok. Tried to write but couldn't.

[muchi]

Hello everyone, ok been reading alot but not all of it, ive made the mistake of buying a chinese clone fgtech v2 with april2012 firmware, contacted the supplier and they act as if im the only one having the issues and want to remote desktop my pc!!!!!
Software crashes, have to use the usb fix before every use no bdm, havent had the chance to use boot. Frustrating.

So now i am after a EU clone, would be nice if someone would PM me or recommend anyone to contact.

PS I love this forum, have had alot of help in the past, i dont really have much to share, just would like to know if i could donate money, and how.
Thank you in advance.

I found the donate link :-)

[eprommazza]

i tested bdm function on edc 16 not work all well
i tested on vw edc16 good on bmw year 203 good but on 2005 not good bdm 100 do them easily
who can prove that marelli and siemens work ? i try with siemens sid 206 with no sucees

maybe your have problem my work perfect

marelli siemens bosch 1mb 2mb tested

[3abas27]

maybe your have problem my work perfect

marelli siemens bosch 1mb 2mb tested
I HAVE SILVER BOX BOUGHT 2 WEEKS AGO FROM CHINESE SELLER UOBD2 WHATS ABOUT NEW ONE 11.9 IS STABLE THAN FIRST V50 ,?
WHTAS DIFFERE NEW PRODUCT V 51 THAN OTHER V50 ,?

[eprommazza]

I HAVE SILVER BOX BOUGHT 2 WEEKS AGO FROM CHINESE SELLER UOBD2 WHATS ABOUT NEW ONE 11.9 IS STABLE THAN FIRST V50 ,?
WHTAS DIFFERE NEW PRODUCT V 51 THAN OTHER V50 ,?

no need write big, ;) i can only report my test and if you not think me i can do image for you when have time
all other don t know
maybe need ask ziyan what new v51..
i want only report the real new news only can have with firmware 53 because enable also the japanese car
but i again not see this

best regards

[3abas27]

no need write big, ;) i can only report my test and if you not think me i can do image for you when have time
all other don t know

best regards
SORRY FOR DISTRUB FROM WHICH CHINESE FACORY IS YOURS ?

[eprommazza]

SORRY FOR DISTRUB FROM WHICH CHINESE FACORY IS YOURS ?

no problem friend ... i buy same to you in uobd2

[3abas27]

no problem friend ... i buy same to you in uobd2
THANKS FOR ASSISTANCE ITALIAN FREIND
ADVISE PLZ TO ME I WILL RETURN IT BACK
FOR EXCHNAGE WHATS DO YOU ADVISE TO CHANGE IT WITH SAME OR TO CHANGE IT WITH NEW ONE 11.9

[eprommazza]

THANKS FOR ASSISTANCE ITALIAN FREIND
ADVISE PLZ TO ME I WILL RETURN IT BACK
FOR EXCHNAGE WHATS DO YOU ADVISE TO CHANGE IT WITH SAME OR TO CHANGE IT WITH NEW ONE 11.9

maybe you want play with me?
ahahahah make what you want! good luck
if possible see if can exchange with version v20 volts amper
lol

[3abas27]

maybe you want play with me?
ahahahah make what you want! good luck
if possible see if can exchange with version v20 volts amper
lol
NO FREIND IAM SERIOUS I CANT PALY WITH PROFESSIONAL
I TOLD ADVISE PLZ EXCHANGING WITH SAME OR WITH NEW ONE V 51 NAMED V 11.9 I KNOW THAT 11.9 IS VOLTAGE

[eprommazza]

NO FREIND IAM SERIOUS I CANT PALY WITH PROFESSIONAL
I TOLD ADVISE PLZ EXCHANGING WITH SAME OR WITH NEW ONE V 51 NAMED V 11.9 I KNOW THAT 11.9 IS VOLTAGE



good luck!!!

[OVERSPEED]

Hi, I download the program and noticed that the minimum requirements are:

2GHz , 2MB RAM and USB2

My laptop is very old (some of my equipments requires EPT and serial) and it configuration is only:

1.79GHz, 1MB RAM (can?t be more) and USB1

Do You think it will work or I?ll have to buy another laptop ?

[tagar]

NO FREIND IAM SERIOUS I CANT PALY WITH PROFESSIONAL
I TOLD ADVISE PLZ EXCHANGING WITH SAME OR WITH NEW ONE V 51 NAMED V 11.9 I KNOW THAT 11.9 IS VOLTAGE


if seller is uobd, 11.9V is the V51 (SE61B product code). their online helpdesk already said 11.9V is voltage. sales don't know much.

[yeager]

Buy someone gal2 from user blacktoy? How it work?

[pettex]

Hello friends,
what is the difference between the
1. price 317$ FGTech Galletto 2 V51 BDM-TriCore-OBD - $317.00 : go car diagnostic , scanner , car , auto scanner, car diagnose, diagnostic tools (http://www.gocardiag.com/index.php?main_page=product_info&cPath=66&products_id=677)
2. price 240$ FGTech Galletto 2-Master V50 - $240.00 : go car diagnostic , scanner , car , auto scanner, car diagnose, diagnostic tools (http://www.gocardiag.com/index.php?main_page=product_info&cPath=66&products_id=554)
3. price 199$ FGTech Galletto 2-Master V51 B BDM-TriCore-OBD - $199.00 : go car diagnostic , scanner , car , auto scanner, car diagnose, diagnostic tools (http://www.gocardiag.com/index.php?main_page=product_info&cPath=66&products_id=676)

which one is the best?

Thanks

[z786]

difference is the price lol

[8k65m]

Hello friends,
what is the difference between the
1. price 317$ FGTech Galletto 2 V51 BDM-TriCore-OBD - $317.00 : go car diagnostic , scanner , car , auto scanner, car diagnose, diagnostic tools (http://www.gocardiag.com/index.php?main_page=product_info&cPath=66&products_id=677)
2. price 240$ FGTech Galletto 2-Master V50 - $240.00 : go car diagnostic , scanner , car , auto scanner, car diagnose, diagnostic tools (http://www.gocardiag.com/index.php?main_page=product_info&cPath=66&products_id=554)
3. price 199$ FGTech Galletto 2-Master V51 B BDM-TriCore-OBD - $199.00 : go car diagnostic , scanner , car , auto scanner, car diagnose, diagnostic tools (http://www.gocardiag.com/index.php?main_page=product_info&cPath=66&products_id=676)

which one is the best?

Thanks

If you believe the information on gocardiag, then 1 = Version Soft 51, 2 = version 50, 3 = version 48.
Perhaps the seller does not know what he was selling. :)

[muchi]

Is there no eu clone sellers here, i posted before but my post has fallen back, afraid no one will notice so posting again, thank you.

[3abas27]

Is there no eu clone sellers here, i posted before but my post has fallen back, afraid no one will notice so posting again, thank you.
plz the new fgtech 2 named 11.9 normaly 11.9 is voltage
is this hardware v 51 or 48 because in ecutool chinese seller said that is v 51 when iask uobd2 chinese seller said that is v 48 whats the reality?

[jr2185]

plz the new fgtech 2 named 11.9 normaly 11.9 is voltage
is this hardware v 51 or 48 because in ecutool chinese seller said that is v 51 when iask uobd2 chinese seller said that is v 48 whats the reality?
All clones are v48. The just change the number in the software or the ad to get sales.

[zecas]

All clones are v48. The just change the number in the software or the ad to get sales.

starnge
when connecting interface with silver box i get v50
black interface using same software and same dll i get v48

[jr2185]

starnge
when connecting interface with silver box i get v50
black interface using same software and same dll i get v48
They change it in the firmware. There was never an original version 50.

[dashtec]

FGTech Galletto 2-Master 11.9 V BDM-TriCore-OBD (http://www.ecutool.com/FGTech-Galletto-2-Master-V51-BDM-TriCore-OBD_10038.html)

DOESNT COME WITH DONLE, SOFTWARE ACTIVATION IS REQUIRED,

SEND HARWARE ID, AND ACTIVATION CODES ARE RETURNED

GRADE A QUALITY, WHATEVER THAT MEANS

[jr2185]

FGTech Galletto 2-Master 11.9 V BDM-TriCore-OBD (http://www.ecutool.com/FGTech-Galletto-2-Master-V51-BDM-TriCore-OBD_10038.html)

DOESNT COME WITH DONLE, SOFTWARE ACTIVATION IS REQUIRED,

SEND HARWARE ID, AND ACTIVATION CODES ARE RETURNED

GRADE A QUALITY, WHATEVER THAT MEANS
I tried it... it didn't work. It's on it's way back.

[sanek2xlc]

Does anyone have any software for Galletto2 unlock? Can share?

[3abas27]

I tried it... it didn't work. It's on it's way back.
but when you ask selller told that new one nomed 11.9 is ver 48 is differe frol silver one with full bdm function whats about this reality?

[tagar]

but when you ask selller told that new one nomed 11.9 is ver 48 is differe frol silver one with full bdm function whats about this reality?


depends maybe who is the seller. uobd sales said their V51 (11.v) is the most stable of the 3 versions. when i asked why the photo shows 0048-xxxx, she replied, hardware is V51 but will use 48. I think they copied the euro clone (also on 48). she said she clarified with their engineer.

[eprommazza]

89 pages always say the same things

[TheBadFrog]

For me it?s very hard to decide which clone is usefull and which one brings only problems!
I working on VW EDC 15, 16, and the newer ones with EDC 17.
For the Bootmode of the newer ones i want to buy galletto.
But which one?
I also want to read and write EEprom without opening EDC 15 and 16.

Best regards

TheBadFrog

[OVERSPEED]

What I find out (it?s MY guess):

there are only 3 makers wich one for:
alu box
Black Box "B" grade
black Box "A" grade (with leds) made by ADKTech, that is supossed to be ok with voltage and BDM

The other company with black box (grade "B") realized that there is BDM and voltage problens and correct it, BUT, there are a great number of already made products that are continued to sell with no "recall" to fix... it will have problens with voltage and/or BDM.

The "alu box" company i didn?t see a fixed version yet (but as someone said it?s a 10 minutos job to get i rigth, s? it wll be less than that to fix the project)

They are all V48 firmware, and I realized that the diference remains only in little things in the hardware to get it ok... they change the version number only to identify the "new" ones with rigth voltage and BDM function.

What I don?t know is if it can work on my old laptop with only 1.79Ghz, 1MB RAM and USBV1... nobody can give me an idea ?

[OVERSPEED]

by the way... a seller just told me thar A and B versions are made by the same company (ADKTECH)...don?t know if it?s true os not...just trying to undestand and find out the better choice

[dashtec]

overspeed, will not work on old laptop, ok on window 7 32 or 64bit, xpro service pack 3 and explorer 7, 50/50 mate

[OVERSPEED]

overspeed, will not work on old laptop, ok on window 7 32 or 64bit, xpro service pack 3 and explorer 7, 50/50 mate

Tks !!! it has XP SP3...but just 1MB RAM (that?s it?s max)...s? i guess i?ll have to buy another if I finally buy one FGTECH)

[camil]

Tks !!! it has XP SP3...but just 1MB RAM (that?s it?s max)...s? i guess i?ll have to buy another if I finally buy one FGTECH)

I have used my fgtech with Acer Aspire one A110, 1Gb Ram, and atom processor, WinXp Sp3 and have not had any problem.

Just used for OBD read/write. Not tested other features like BDM yet.

[OVERSPEED]

I have used my fgtech with Acer Aspire one A110, 1Gb Ram, and atom processor, WinXp Sp3 and have not had any problem.

Just used for OBD read/write. Not tested other features like BDM yet.


GREAT !!!! OBD (i guess) demands more than bootmode and BDM... just have to know if it work with USBV1 lol !!!

[camil]

GREAT !!!! OBD (i guess) demands more than bootmode and BDM... just have to know if it work with USBV1 lol !!!

If USBv1 not enough just buy pcmcia with USB2.0, i bet much cheaper than a newer laptop. :)

[greg38]

BMW MS43 via OBD2 read/write ok





http://i1071.photobucket.com/albums/u508/Gtester76/Chiptunning/ms43_galletto2-1.jpg

[Africa]

Hello, I have fgtech v50, BMD does not work, like running, also seems to be a little unstable. I'm told that the v50 not work bdm, but also say you can run ... As?

You can upgrade to the V51, is more stable?
My fgtech takes hardware key usb.

[OVERSPEED]

I don?t know if it was told, but and tricore ? it works ? wich version ?

[sunduk112]

Hello, I have fgtech v50, BMD does not work, like running, also seems to be a little unstable. I'm told that the v50 not work bdm, but also say you can run ... As?

You can upgrade to the V51, is more stable?
My fgtech takes hardware key usb.

try up power to 12V

[cartechnics]

yes change r64 inside galletto
r64 is 100k
change with 82k
power more 12v for read write ecu with BDM

[Samaelson]

Hi guys,

some further information that could be helpful for clarification...

The picture in the document (contained in the .zip) shows how to identifiy FW and tool number in the software.

Afaik there have been no official fw versions like 50 or 51 but a version jump from 48 to 53. But I am not 100% sure...

As the new firmware 53 started in October 2011 (10/11) the software clones come along with can't be newer than that, right?

Please correct me if I am wrong here.

Best wishes

[3abas27]

yes change r64 inside galletto
r64 is 100k
change with 82k
power more 12v for read write ecu with BDM
the problem is not bdm function the problem is i have fgtech v 50 silver one i read with it edc 16 in mode function vw ok
and bmw ok but anther bmw not ok where is the problem bdm 100 clone read write ok
i should change resistor from 100 k to 82 k or i should chage my fgtech v 50 with another one ?
ALSO siemes sid 206 not ok on bdm is whats i test at the moment
lookig for clarification 1000 thanks to all

[datapage]

A clone never looks like another.
that's the problem ...

[VAGTECH]

has anyone got fg galletto software that works, i buy clone but software wont open, any help would be great

[chriskross]

tested on

opel agila 1,0
Golf 4 EDC15
Peugeot 206 7.4.4
Mini EMS2
works fine.

VW T4 EDC15 doesn`t work

[dashtec]

tried 2008 passat cc edc17 via obd, read ok write ok no problems, very stable

[minchion]

has anyone got fg galletto software that works, i buy clone but software wont open, any help would be great

same problem, need sw that works without dongle

[mislav88]

dashtec where did you bought your clone?

[minchion]

already sent mail to request activation but still no answer

[Africa]

yes change r64 inside galletto
r64 is 100k
change with 82k
power more 12v for read write ecu with BDM

I placed in parallel to the resistor R64 of 470k = 82K.
The voltage has risen, but it still fails.

[3abas27]

I placed in parallel to the resistor R64 of 470k = 82K.
The voltage has risen, but it still fails.
what kind of ecu you tested in bdm ? i can help you
me tested bdm function work for some and not for others for vw for exemple work no problem for bmw not all edc 16 work in bdm
how did you do for connection how you connected the ecu to progrmmer ?

[Africa]

what kind of ecu you tested in bdm ? i can help you
me tested bdm function work for some and not for others for vw for exemple work no problem for bmw not all edc 16 work in bdm
how did you do for connection how you connected the ecu to progrmmer ?

I've made the connection with connectors that brings bdm, also works with the adapter bdm120 of BDM100 evc.

My FGtech2, has a very unstable operating in OBD and BDM, sometimes gives me many errors as to attach the pictures.
I can say it works 50% of the time and fails 50% of the time I use it.

fots get adapters and connections.
And a picture reading the connector unit with bdm120.

attached another image that looks good sometimes reading

Data may be rare in the ecu information, are control units that use test files were recorded from Siemens, Bosch, of any car ..
The trick I have to catch all the.

[ramiro1]

...try galletto2 unlock...please...help me...thanks

[Africa]

...try galletto2 unlock...please...help me...thanks

I read the eprom of mine, I hope that helps you serve.

Read EEPROM successful Device 0
0000 : 00 40 03 04 AD DA 00 00 80 16 08 00 00 00 98 0A @. .. .. .. .. .. .. ..
0010 : A2 0E B0 12 32 18 05 00 0A 03 46 00 54 00 44 00 .. .. .2 .. .. .F .T .D
0020 : 49 00 0E 03 46 00 47 00 54 00 65 00 63 00 68 00 .I .. .F .G .T .e .c .h
0030 : 12 03 34 00 37 00 34 00 31 00 34 00 35 00 35 00 .. .4 .7 .4 .1 .4 .5 .5
0040 : 34 00 00 00 00 00 54 57 97 DB 1D D4 E9 01 D0 FE .4 .. .. WT .. .. .. ..
0050 : 05 D0 F5 C6 F9 1E 39 DC 43 36 52 04 8D 90 45 AE .. .. .. .9 6C .R .. .E
0060 : AF AC C1 6B 97 F4 20 F8 CC FE 1C 3E DB 02 34 04 .. k. .. .. .. >. .. .4
0070 : 37 DD F0 15 CD FC CC 00 EB C6 00 00 00 00 00 53 .7 .. .. .. .. .. .. S.
0080 : 19 04 E6 FB 00 00 E2 ED 37 E0 42 00 00 00 00 00 .. .. .. .. .7 .B .. ..
0090 : 00 00 00 00 00 00 00 00 45 41 36 56 50 45 37 50 .. .. .. .. AE V6 EP P7

[dashtec]

ecutool abit expensive then other seller but had very good tech support, remote assistance, got the unit working, had to stay up until 4am

go for grade a option

FGTech Galletto 2-Master 11.9 V BDM-TriCore-OBD (http://www.ecutool.com/FGTech-Galletto-2-Master-V51-BDM-TriCore-OBD_10038.html)

[minchion]

ecutool abit expensive then other seller but had very good tech support, remote assistance, got the unit working, had to stay up until 4am

go for grade a option

FGTech Galletto 2-Master 11.9 V BDM-TriCore-OBD (http://www.ecutool.com/FGTech-Galletto-2-Master-V51-BDM-TriCore-OBD_10038.html)
got it same place but program dont start, drivers are installed an activation code accepted but not working,.. ca you help ?

[melcool]

uninstal USB driver!
write eeprom in galletto with 12V conected ...also reinstal USB driver
start program and activate KEY (Copy again FGtech dir from CD)

[minchion]

uninstal USB driver!
write eeprom in galletto with 12V conected ...also reinstal USB driver
start program and activate KEY (Copy again FGtech dir from CD)
I can't write eeprom if uninstall drivers first, FTReadWrite dont find device

[melcool]

uninstal/reinstal

[tagar]

go for grade a option

FGTech Galletto 2-Master 11.9 V BDM-TriCore-OBD (http://www.ecutool.com/FGTech-Galletto-2-Master-V51-BDM-TriCore-OBD_10038.html)

what is grade a option? is this related to version?

[dashtec]

if you having problem email them, or request remote assistance, due to time zone you will be up untill 4am

[minchion]

if you having problem email them, or request remote assistance, due to time zone you will be up untill 4am
thanks dashtec ! I will try now I'm doing a fresh install of Xp without antivirus ( mine already disabled ) and maybe they can help, tried to write eeprom and program shows write successful but final bits remain still the same as when I got

[Overtune]

I placed in parallel to the resistor R64 of 470k = 82K.
The voltage has risen, but it still fails.

Return your tool and ask for a refund. I got my money back....

[ENCEDIAG]

HI ,how to extract the ISK code in UCH whit clip

[3abas27]

Return your tool and ask for a refund. I got my money back....
I CAN CONFIRM THAT FGTECH WORK ON BDM MODE BOSCH EDC 16 ONLY 50% NOT 100 % WHO CAN CONFIRM THAT CLONE WORK ON SIEMENS AND DELPHI,?
TRIED MANY TIMES NO SUCCES

[3abas27]

I CAN CONFIRM THAT FGTECH WORK ON BDM MODE BOSCH EDC 16 ONLY 50% NOT 100 % WHO CAN CONFIRM THAT CLONE WORK ON SIEMENS AND DELPHI,?
TRIED MANY TIMES NO SUCCES
I CONTINU TO SAY THAT ALL WHO? POSTED WORKING BDM FOR FGTECH CLONE POST ONLY EDC 16 BOSCH NO ONE POSTED SIEMENS OR DELPHI

[elchip]

I CONTINU TO SAY THAT ALL WHO? POSTED WORKING BDM FOR FGTECH CLONE POST ONLY EDC 16 BOSCH NO ONE POSTED SIEMENS OR DELPHI

Here we go from China clone black box green PCB BDM of Siemens SID Peugeot 407 ECU :

141264

I included also BDM100 reading to u can compare.

Regard's

[cartechnics]

yopp
i have test on ECU BOSCH DDE7 BMW E46
BDM not work error mpc not work
test on OBD OK
why obd work and read write and not work on BDM ?????
PS test on EVC BDM ok read and write

[3abas27]

Here we go from China clone black box green PCB BDM of Siemens SID Peugeot 407 ECU :

141264

I included also BDM100 reading to u can compare.

Regard's
MY ONE IS SILVER WITH GREEN PCB
I TRIED ON BDM NOT ALL EDC 16 OK LIKE BMW YEAR 2006 NOT WORK ON BDM
I TEST ON SID 206 FOR FORD FOCUS NOT WORK
WHATS DIFFERNCE BETWWEN BLAK AND SILVER BOX
AND WHY ALL TALK ABOUT GREEN PCB AND NOT ON BLACK ONE

[3abas27]

MY ONE IS SILVER WITH GREEN PCB
I TRIED ON BDM NOT ALL EDC 16 OK LIKE BMW YEAR 2006 NOT WORK ON BDM
I TEST ON SID 206 FOR FORD FOCUS NOT WORK
WHATS DIFFERNCE BETWWEN BLAK AND SILVER BOX
AND WHY ALL TALK ABOUT GREEN PCB AND NOT ON BLACK ONE
BDM 100 CLONE DID ALMOST OF EEC 16 AND SIEMENS AND DELPHI AMSO MARELLI I TESTED ON MANT ECU NEVER FAILS BUT IS LIMITED CANT DO NEWER EC 16 AND SIEMNS SID 206 AND OTHERS IF FGTECH 2 CLONE DO ONLY SOME EDC 16 ON BDM AND DO SIEMENS SID 206 AND BOTHERS WHY WE LOST DISCUTION ON BDM FUNCTION ON FGTECH BDM 100 WHICH COST 25 DOLLARS IS ENOUGH
HOPE AOUR IN FORUM PROVE FGTECH ON ECU WHICH ARE NOT SUPPOTRED BY BDM 100 CLONE AND PROVE ALSO FGTECH AND TRICORE

[physyc]

BDM 100 CLONE DID ALMOST OF EEC 16 AND SIEMENS AND DELPHI AMSO MARELLI I TESTED ON MANT ECU NEVER FAILS BUT IS LIMITED CANT DO NEWER EC 16 AND SIEMNS SID 206 AND OTHERS IF FGTECH 2 CLONE DO ONLY SOME EDC 16 ON BDM AND DO SIEMENS SID 206 AND BOTHERS WHY WE LOST DISCUTION ON BDM FUNCTION ON FGTECH BDM 100 WHICH COST 25 DOLLARS IS ENOUGH
HOPE AOUR IN FORUM PROVE FGTECH ON ECU WHICH ARE NOT SUPPOTRED BY BDM 100 CLONE AND PROVE ALSO FGTECH AND TRICORE

http://cache.ohinternet.com/images/thumb/f/f5/CapsLock.jpg/618px-CapsLock.jpg

[minchion]

can anyone read eeprom from this version ? already tried the usbfix but program dont start

[xtreem]

someone already tested silver box on ecu ford ex: siemens sid, our ecu opel 1.3 etc?
thanks

[Africa]

if not read delphy or siemens, the adapter is probably bad.
bdm port is generic except bosch, pin-pin, to go ok
someone correct me if I'm wrong.


from more than 10 years using bdm, baseboards, etc.

[mihaiservice]

hi
i have manage to start new sw versione V51 of fgtech but hw are different then V51,i have try to start with V51 hw but can not select voltage for bdm,the hw are different

[mihaiservice]

here are screen shot

[physyc]

hi
i have manage to start new sw versione V51 of fgtech but hw are different then V51,i have try to start with V51 hw but can not select voltage for bdm,the hw are different


So now you know what sellers and builders are telling here for the last 2 months: Fgtech clones with V51 are FAKE...

[Overtune]

can anyone read eeprom from this version ? already tried the usbfix but program dont start

Read my previous posts...

[Overtune]

ecutool abit expensive then other seller but had very good tech support, remote assistance, got the unit working, had to stay up until 4am

go for grade a option

FGTech Galletto 2-Master 11.9 V BDM-TriCore-OBD (http://www.ecutool.com/FGTech-Galletto-2-Master-V51-BDM-TriCore-OBD_10038.html)

Is this unit working with 0048 genuine software version? Without dongle?

[minchion]

Read my previous posts...
have read this thread from beginning but maybe I miss some of your post, do you have any solution Overtune ?

[paulserk]

has anybody keygen for this version:

FGTech Galletto 2-Master 11.9 V BDM-TriCore-OBD (http://www.ecutool.com/FGTech-Galletto-2-Master-V51-BDM-TriCore-OBD_10038.html)

???

Cheers

Paul

[paulserk]

Is this unit working with 0048 genuine software version? Without dongle?


tested it, didn't working with genuine software...

[greg38]

Ford Focus TDCi 1.8 115HP over OBD2 Read/Write OK

[mihaiservice]

hi
not need any keygen for this V51, all old v48..v50 hw can not work with this kind of sw,new v51 hw are different,the fgt2xx.dll must edit to start the sw w/o license
already have upload a screen shot

[paulserk]

Hi mihaiservice

I can't find the posting where you descripe editing the dll ?!
Can you give me the link????

my hardware is v51 and my software said I have to activae it by name and key :)

Cheers

Paul

[mihaiservice]

Hi
here are all my info,i have manage to start the v51 sw with old v50 hw(V50-103)
the new china sw are V51 for sure,i have also orig v51 and v53
in archive are dll and eep it need to replace it, but all hw aluminium silver or black can not run it corectly!see archive !
new hw it have two tx fet to select wich voltage it need to power up ecu on bdm mode,hw v48 and v50 not have this two tz
ps.it need dongle from v48 or v51 to run the newest v51 china sw !!!
you can download this sw from here:
http://www.digital-kaos.co.uk/forums/f175/fg-tech-help-287047/

[minchion]

I have te same version but can't make it work.. mine comes without dongle but even I put activation code allways have error...

[melcool]

in software that comes with "HW51" it dont exist 3.3 or 5v select button for BDM r/w!!!

[paulserk]

hmmm I have new board with the leds... But I also didn't have a dongle... I must enter name and key !?!?!?!?

How can I make this work?

Cheers

Paul

[chiptorque]

hello, friends, I have acquired a black box FGtech. I went to try the FG tech2 trucks with negative results. not connect to any unit EDC7U31, EDC7C ... means that do not work commercial vehicle drivers, may be the SW version, does not work for boot mode. BDM is ok now. thanks and regards ...

[Artilect]

Hire is the tutorial how to properly connect the ecu in BDM mode.

You have to also check the BDM socket it is bad soldered to the board. Pins are soldered from botom and connection furder are at the top of the board. Make some aditional soldering at the top.

BR

Hope will help somebody.

[Artilect]

But my FGT2 is still not working in BDM mode. It is not so frustrating to me because I have BDM 100 that is working awesome with those ECU-s till now.


My FGT2 is working with Tricore BOOT mode and OBD OK. So I can cover now the new EDC17 ECU-s, this was also the purpose of buying this device.



But I still looking the solution for BDM working, when I have time. So if anybody have any suggestion please post how to solve BDM problem on FGT2.



BR

[paulserk]

Hi
here are all my info,i have manage to start the v51 sw with old v50 hw(V50-103)
the new china sw are V51 for sure,i have also orig v51 and v53
in archive are dll and eep it need to replace it, but all hw aluminium silver or black can not run it corectly!see archive !
new hw it have two tx fet to select wich voltage it need to power up ecu on bdm mode,hw v48 and v50 not have this two tz
ps.it need dongle from v48 or v51 to run the newest v51 china sw !!!
you can download this sw from here:
http://www.digital-kaos.co.uk/forums/f175/fg-tech-help-287047/


now software wants a dongle :((( My version hasn't got a dongle??!?!?! :(((( Have you got help for me??? Or must I send back my galletto?

Cheers

Paul

[powertdi]

Dawn, guys! This chineese HW50,51...53... will bring you into grave.... Now is only HW 48 are stable.
Today I mayde Citroen C5 2009 1.6HDI= OBD2 mode,
Skoda Superb2 2012 year edc17c46 =read OBD, write only boot. Catterpilar Tractor- BDM mode.
Use tested, dont waste your time if you are professional.

[3abas27]

Hire is the tutorial how to properly connect the ecu in BDM mode.

You have to also check the BDM socket it is bad soldered to the board. Pins are soldered from botom and connection furder are at the top of the board. Make some aditional soldering at the top.

BR

Hope will help somebody.
have test bdm on siemens sid 206 or delphi ecu
bdm edc16 already solved

[paulserk]

got today S/N for V51... I also haven't got possibility to changen BDM voltage. Seems to be older software. So will be nice if we got newest software to run.

testet Delphi DCM3.4 CAN (Peugeot 307 HDI) read ok... Didn't write yet.

[bearheroes]

Does anyone know if these BDM3 adapter for BDM frame (http://www.codecard.lt/electronics/tools/bdm3-adapter-for-bdm-frame-siemens-bosch-marelli-/prod_482.html%20work%20with%20FGtech%20for%20BDM?) work with Fgtech?

[matech]

I see "BDM100" plug in the first photo: so You need the adapter to use the bdm100 style adapters. I have the scheme if you need it.

Anyway...hallo!
I bought the Galletto in April, and I'm very happy with this! i've a silver box european one.

Did a lot of ECU with obd and boot (bosch, siemens, marelli, delco, delphi), without a problem!

The only problem is BDM:
powering up with stabilysed 12.5V the program shows only 11.5V and try reading the ecu it has a comunication error.

The seller gave me a fix for the 24V truck use (R58=1 KOHM and R59=5,6 OHM), and another person told me to change the resistors near the BDM port from 100ohm to 10ohm.
I've done only the first mod, now, without any change in the voltage shown in the program.

Is it correct the second fix?

I'm going to buy ad edc17 ecu to test the bootloader tricore, too..

Thanks.

[mihaiservice]

hi
what are so hard to start this sw ? already have post dump from hw,just rewrite eep and replace dll
the sw v51 will start for sure,already have test it on two laptop

[mihaiservice]

did you have replace dll ? i am using xp sp2 on two laptop and are ok

[niwat_spp]

did you have replace dll ? i am using xp sp2 on two laptop and are ok
Please share dll and eeprom fix for sw v51?
thank in advance

[minchion]

hi
what are so hard to start this sw ? already have post dump from hw,just rewrite eep and replace dll
the sw v51 will start for sure,already have test it on two laptop

I dont undertand what's wrong. downloaded sw and and write eep and replace fgt2xx.dll but still nothing. I have sp3 is this a problem ? after write last bits remanin still same as before and don't replace with yours ( EA6VWE3A )

[Africa]

fgtech2 read directly obd2 truck? or need to make any changes?

[mihaiservice]

I dont undertand what's wrong. downloaded sw and and write eep and replace fgt2xx.dll but still nothing. I have sp3 is this a problem ? after write last bits remanin still same as before and don't replace with yours ( EA6VWE3A )

hi
dont have tested on xp sp3 !

[mihaiservice]

Please share dll and eeprom fix for sw v51?
thank in advance

read post 1388

[mihaiservice]

I have te same version but can't make it work.. mine comes without dongle but even I put activation code allways have error...

hi
can you post a link from were you have buy it this kind of hw ?already have buy it two hw but are same shit :(

thx

[minchion]

hi
can you post a link from were you have buy it this kind of hw ?already have buy it two hw but are same shit :(

thx
I buy it from here :
FGTech Galletto 2-Master 11.9 V BDM-TriCore-OBD (http://www.ecutool.com/FGTech-Galletto-2-Master-V51-BDM-TriCore-OBD_10038.html)
and their sw asking for activation tried other sw so I tried odher sw that don need it, the link you post requires dongle after dll change, I dont have it..

[paulserk]

I also have V51... I replaced dll and write eep (last digits didn't change, I believe that will be serialnumber of ftdi chip or so)...

Software said I should insert the dongle :( V51 comes without dongle....

Cheers

Paulk

[Overtune]

Hi
here are all my info,i have manage to start the v51 sw with old v50 hw(V50-103)
the new china sw are V51 for sure,i have also orig v51 and v53
in archive are dll and eep it need to replace it, but all hw aluminium silver or black can not run it corectly!see archive !
new hw it have two tx fet to select wich voltage it need to power up ecu on bdm mode,hw v48 and v50 not have this two tz
ps.it need dongle from v48 or v51 to run the newest v51 china sw !!!
you can download this sw from here:
http://www.digital-kaos.co.uk/forums/f175/fg-tech-help-287047/



This is the chinese 0050-103 software. Most chinese sellers sell the 0050-0048 old hw as you mention on your photo as new hw51. And the fgtech v51hw on your picture, is sold with soft 0048 without dongle. This is a messy situation...

[mihaiservice]

This is the chinese 0050-103 software. Most chinese sellers sell the 0050-0048 old hw as you mention on your photo as new hw51. And the fgtech v51hw on your picture, is sold with soft 0048 without dongle. This is a messy situation...

Hi
sw not are for sure V48 becouse one dll are new in v51 i have compare the sw for few times in the last few weeks!

[cartechnics]

i have flash with eep v51 my galletto v50 grey alu box and change FGT2xx.dll
software opening ok
and low voltage dont work for me

[Overtune]

not new just hacked. This explains the different filesize. Main core of the software is 0048... The exe has also different filesize as well, but if you compare both files on a proper exe editor you will see they are the same shit.

[matech]

I see "BDM100" plug in the first photo: so You need the adapter to use the bdm100 style adapters. I have the scheme if you need it.

Anyway...hallo!
I bought the Galletto in April, and I'm very happy with this! i've a silver box european one.

Did a lot of ECU with obd and boot (bosch, siemens, marelli, delco, delphi), without a problem!

The only problem is BDM:
powering up with stabilysed 12.5V the program shows only 11.5V and try reading the ecu it has a comunication error.

The seller gave me a fix for the 24V truck use (R58=1 KOHM and R59=5,6 OHM), and another person told me to change the resistors near the BDM port from 100ohm to 10ohm.
I've done only the first mod, now, without any change in the voltage shown in the program.

Is it correct the second fix?

I'm going to buy ad edc17 ecu to test the bootloader tricore, too..

Thanks.

No-one with any experience?

[mihaiservice]

I have te same version but can't make it work.. mine comes without dongle but even I put activation code allways have error...

hi
what versione of sw you have ? replace eobd if you have v51 but it need dongle to run this sw

[minchion]

hi
what versione of sw you have ? replace eobd if you have v51 but it need dongle to run this sw
Thank you but I repeat, I have no dongle, is it possible to create one ? can you post dongle sw ?

[technic]

not new just hacked. This explains the different filesize. Main core of the software is 0048... The exe has also different filesize as well, but if you compare both files on a proper exe editor you will see they are the same shit.

Totally true. I sent mine back (the black one with three leds on top)

[jg23]

i buy update software to april 2012 from Auto Electronics Shop - Car Diagnostics, Immo, Keys, Mileage and Other Tools
some time all working well but after month i lose with software all truck, motorbyke and tractor
someone can help renew ftdi chip ?

[ipejasinovic]

Did you contact your seller? What he told you?

[jg23]

Did you contact your seller? What he told you?

yes, no answer for today :(

[ipejasinovic]

I'm not quite sure about that. Please check your emails.

[jg23]

I'm not quite sure about that. Please check your emails.

i check every day and nothing
you know this seller ?

[ipejasinovic]

Yes, I know very well and I know that email is sent to you. Please send me your email on PM.

[jg23]

Yes, I know very well and I know that email is sent to you. Please send me your email on PM.

pls check pm

[paulserk]

is it possible to emulate such a dongle?

[Africa]

I need to read a truck from obd, 24V., my fgtech is gray metal box, you can read or truck breaks fgtech by connecting to 24Volts. what is the solution?

[Uniqaz]

i buy update software to april 2012 from Auto Electronics Shop - Car Diagnostics, Immo, Keys, Mileage and Other Tools
some time all working well but after month i lose with software all truck, motorbyke and tractor
someone can help renew ftdi chip ?
You lost just tractors, and from me this scamer stole 1000euros....

[camil]

And again monothematic pal ... ufff, it really bores!

[Uniqaz]

And again monothematic pal ... ufff, it really bores!
Forum members should know its "heroes" lol

[camil]

Forum members should know its "heroes" lol

lol i remember you and your fight with ipejasinovic, i though you finally tried to sort it privatelly like you should, but no, you come back and hit our heads again. Certainly, you're our hero.

I will allow myself to remind you the thread tittle, "FG Tech Galleto 2", it's not, "Wash up your dirties with EU Clone Galletto 2 seller". I would suggest you would arrive to an agreement but PRIVATELLY. None of us are interested in this public fight.

Best regards, my hero ;)

[PremierD]

And I echo that ... keep to the topic please .. anything else ..by PM ...

[Overtune]

Euro clones already at 599 Euros...

[fish13]

Overtune
Link pls.

[Overtune]

Sorry i don't promote any of these tools...There are other people here who can guide you with a p.m

[cartechnics]

please link to EU clone
thanks

[chipauto]

please help find the original file
bmw 3.0 edc 16c35
0 281 016 639
8 509 035 01
170398379

[VAGTECH]

everytime i use the fg galletto software i have to run the usb fix on the interface or it wont connect, can anyone tell me why this is. any help would be graet.

[xanubysx]

I would rather clone EU FGtech v2 threw ... if anyone knows please SZ

[Overtune]

please help find the original file
bmw 3.0 edc 16c35
0 281 016 639
8 509 035 01
170398379

offtopic... :captain: :roflmao::roflmao::roflmao:

[chris_e36_328]

Hi guys, I tried my euro Gall2 on MAN trucks, E4 and E5. no luck. can anyone confirm their tool working on any 24V application? I am interested in MAN especially, and bootmode on Merc Actros Temic. cheers

[poxxxy]

Hi all,

Trying to get my galletto 2 (silver box) to install on Windows 7 x64 without any luck. Supplied drivers not working at all, by going through Have Disk and selecting the .inf manually I get slightly further but when trying to install it says that it can't find the specified file.

I've jiggled the .dlls around and placed them in other folders but still no luck.

Any idea?

Hardware ID looks a little strange to me: USB\VID_0403&PID_DAAD&REV_0600

Isn't the VID prefix something to do with webcams?

[minchion]

Hi guys, I tried my euro Gall2 on MAN trucks, E4 and E5. no luck. can anyone confirm their tool working on any 24V application? I am interested in MAN especially, and bootmode on Merc Actros Temic. cheers
have you tried on iveco's EDC7UC31 MS6.2 ? I got mine working and want to try when possible

[ipejasinovic]

Isn't the VID prefix something to do with webcams?
VID = Vendor ID

[poxxxy]

Managed to get it installed using drivers from post 927, :). Now... i'm attempting a bench connection to an EDC15P from a Passat... what do I need to connect to the ECU when using the connector with all the loose cables? Do I need to provide external power to the ECU also?

Ok... when sitting on the EOBD screen, the galletto clone is now making noises like a relay flicking, and then the voltage reading goes to low voltage, then back to 11.6v without any ecu connected. Incorrect behaviour right? :(. I've got the EDC15 connection pictures in the fgtech folder but theres many wires the same colour on the connector i'm talking about, anyone help?

http://www.chinasinoy.com/upload/pro/fg-tech-galletto-2-master-88.jpg

[Overtune]

Hi guys, I tried my euro Gall2 on MAN trucks, E4 and E5. no luck. can anyone confirm their tool working on any 24V application? I am interested in MAN especially, and bootmode on Merc Actros Temic. cheers

This depends on which euro clone you have bought. There are basically 2 versions of euro clones i think. One is tested on 24v by k-line and performs ok.

[bearheroes]

Managed to get it installed using drivers from post 927, :). Now... i'm attempting a bench connection to an EDC15P from a Passat... what do I need to connect to the ECU when using the connector with all the loose cables? Do I need to provide external power to the ECU also?

Ok... when sitting on the EOBD screen, the galletto clone is now making noises like a relay flicking, and then the voltage reading goes to low voltage, then back to 11.6v without any ecu connected. Incorrect behaviour right? :(. I've got the EDC15 connection pictures in the fgtech folder but theres many wires the same colour on the connector i'm talking about, anyone help?

http://www.chinasinoy.com/upload/pro/fg-tech-galletto-2-master-88.jpg
Try this...In ground you should use the black.
This behavior is right.

[poxxxy]

Thanks bearheroes. Yeah thats what i'm trying, i'm putting the blue cable on that pin... do the red and black cables on the harness not provide +12v and ground? Just the two small wires at beginning of the harness?

[bearheroes]

Thanks bearheroes. Yeah thats what i'm trying, i'm putting the blue cable on that pin... do the red and black cables on the harness not provide +12v and ground? Just the two small wires at beginning of the harness?

This two small cables,should be connected to external power.

[poxxxy]

Oh right, ok... so if I hook these two cables upto a battery for example (proper power supply still needed at the moment so if anyone recommends a nice bench PSU i'd appreciate the input and advice) then the rest of the red cables will provide 12v+? I thought perhaps the galletto would power the ECU from the DC input that has. Because when I touched the small red and black wires together they definately had power going through them and the power supply in the unit shut itself down breifly lol.

[bearheroes]

Oh right, ok... so if I hook these two cables upto a battery for example (proper power supply still needed at the moment so if anyone recommends a nice bench PSU i'd appreciate the input and advice) then the rest of the red cables will provide 12v+? I thought perhaps the galletto would power the ECU from the DC input that has. Because when I touched the small red and black wires together they definately had power going through them and the power supply in the unit shut itself down breifly lol.

No..fgtech needs external power for itself,except when it is used in OBD connection.

[bearheroes]

Debugger-Instruktion - OBD-Wiki (http://wiki.obdtuning.com/?title=Debugger-Instruktion)
Very useful site for proper connections...

[poxxxy]

Debugger-Instruktion - OBD-Wiki (http://wiki.obdtuning.com/?title=Debugger-Instruktion)
Very useful site for proper connections...

Awesome website, wish I could download it! :)

[chris_e36_328]

This depends on which euro clone you have bought. There are basically 2 versions of euro clones i think. One is tested on 24v by k-line and performs ok.

Hi mate,

silver box euro if that gives you any info.. this is the first 24V system I am using it on. tried on various bdm, tricore, and obd. So far so good, only let me down on edc15VP on 2002 T4 2.5tdi OBD so far.

So is it trucs protocols/firmware thats at fault, or the whole 24V processing circuit presents an issue? I have actros to do in bootmode next week, wonder whether its going to be 24V appicaiton issue again and cancell the job untill I can get to the bottom of it.. any help much appreciated

[xanubysx]

anyone have experience with a Chinese clone FGtech v2 in 51 new hardware? I wonder if quite works ... K-line can, work and tricore EDC17 and BDM?? ... truck no interested... only car 12v...

[poxxxy]

http://img27.imageshack.us/img27/8867/gallettoproblem.th.jpg (http://imageshack.us/photo/my-images/27/gallettoproblem.jpg/)
http://img267.imageshack.us/img267/1319/20120910130235.th.jpg (http://imageshack.us/photo/my-images/267/20120910130235.jpg/)
http://img228.imageshack.us/img228/4234/20120910130256.th.jpg (http://imageshack.us/photo/my-images/228/20120910130256.jpg/)
http://img208.imageshack.us/img208/7636/20120910130229.th.jpg (http://imageshack.us/photo/my-images/208/20120910130229.jpg/)

I tried connecting a 12v dc power supply to the two short connections on the harness but had the same problem... Can anyone spot anything fundamental i'm doing incorrect (EDC15P).

[bearheroes]

I tried connecting a 12v dc power supply to the two short connections on the harness but had the same problem... Can anyone spot anything fundamental i'm doing incorrect (EDC15P).

in your photos there is no power supply.

[poxxxy]

Not in the photo, but like I said, I have tried connecting another power supply to the red and black connections on the harness (the ones in the picture that have nothing connected.)

[physyc]

http://img27.imageshack.us/img27/8867/gallettoproblem.th.jpg (http://imageshack.us/photo/my-images/27/gallettoproblem.jpg/)
http://img267.imageshack.us/img267/1319/20120910130235.th.jpg (http://imageshack.us/photo/my-images/267/20120910130235.jpg/)
http://img228.imageshack.us/img228/4234/20120910130256.th.jpg (http://imageshack.us/photo/my-images/228/20120910130256.jpg/)
http://img208.imageshack.us/img208/7636/20120910130229.th.jpg (http://imageshack.us/photo/my-images/208/20120910130229.jpg/)

I tried connecting a 12v dc power supply to the two short connections on the harness but had the same problem... Can anyone spot anything fundamental i'm doing incorrect (EDC15P).

power is quit fundamental....
power to the ecu that is...

maybe ju better buy a ready made cable for it...

[poxxxy]

My question is, do any of the red and black connections on the harness (the longer ones), carry 12v+ when the smaller wires at the start of the harness are connected to a power source?

EDIT:

Disconnected the 12v psu from the galletto and then put the two short cables on the PSU. Seems to just power the galletto. :(.

[bearheroes]

My question is, do any of the red and black connections on the harness (the longer ones), carry 12v+ when the smaller wires at the start of the harness are connected to a power source?

yes,they should...use a multimeter to check it.

[physyc]

yes,they should...use a multimeter to check it.

"Oh damn, no one told me you need a multimeter and common sense to become a file flasher..."

sorry for this, but some guys ask for problems...
:stupid:


Dude, if you have troubles understanding the wire loom the hacker made you. (You clearly did no effort with a multimeter!) get yourself a female OBD plug from scrapyard.
Connect 12V+, 12V- to it. and K line. (make sure your 12V + and - go also to powersource!

hook those to the ecu like in this pinout.

http://wiki.obdtuning.com/images/thumb/c/cb/VAG_EDC15P_P%2B.jpg/800px-VAG_EDC15P_P%2B.jpg


Be honnest! How many times did you connect the ecu WITHOUT knowing what the wires on the tool are for?

[poxxxy]

Ok, so I don't have a multimeter to hand... my dads borrowing it so i'll be getting it from him tonight, all grounds on the harness appear to be correct so perhaps maybe just the K-line color is incorrect (should be the blue cable)? In all honesty, the ECU i'm testing it on may be dead as it was given to me a few months back by a work colleague who had no idea.

I have wanted to get the female ECU plug previously, and I could of done bench flashing with my MPPS very easily that way, however decided I wanted a galletto and thought the harness option might help!

"Be honnest! How many times did you connect the ecu WITHOUT knowing what the wires on the tool are for?" - Not sure what you meant by this as I have only tried this one way, and it should be correct as far as what everyones telling me :).

[physyc]

so the k-line "might" be incorrect.
that "might" be something to make sure before you power up your tools.

that is what i mean with my question...

you get a tool you never worked with, and just starting to plug it in as some people on the forum tell you?
These clone cables have no quality check as originals.
so yes it is good possible that the k-line (or other) have wrong color, to the wrong pin

Same with ecu.
someone gives you ecu. that "might" be broken. Did you measure the pins to check if the K-line is not shorted to + or -?
You know what happens if you put 12V on the K-line?

[poxxxy]

I've definately not put 12v on the k-line :), I wouldn't know which pins on to check for continuity on the female part of the lead (that plugs into the box) as there is a different amount of pins (15 as opposed to 16) on an OBD connector. I went about plugging it all in by reading through the supplied documents... all the picture has is colours... so I presume that cyan was a key for the blue cable (there is only one of them on the harness). lol.

[quattrotr]

Mine does these cars, no problem. Megane 3 1.5Dci SID305 canbus.



In car list and menu there is no SID 305 option, all newer 1.5 dci listed as SID 301. Does this SID301 support 305 too? SID301 were BDM ECU's with Motorola MPC, 305 are Tricore one...

[poxxxy]

ok, some more troubleshooting progress... by trying to identify the k-line I checked the OBD connector supplied with the galletto, and this ended up being 2nd pin in on the left on the top row. Went through the coloured cables and found continuity on the purple wire (not blue!), however with the multimeter when applying a power source on the red/black short cables... I am not getting 12v+ on the red cables... the ground works though. So why I am not getting power on the red cables? Any ideas appreciated :).

[physyc]

now we are getting somewhere.

If you hook your multimeter to the red wire without 12v, to what pin on the plug is it connected?

[poxxxy]

Which red cable are talking about here? the small one? :) lol. Sorry for being such a noob :), I really appreciate the assistance.

The short one (red) is going to the bottom right pin of the connector that goes into the interface.

[chris_e36_328]

Hi, Could those who had success reading/writing any 24V trucks with their clone post info on what ecus the gall works on?

[poxxxy]

The rest seem to goto pins 4 and 5 from the left on the top row, however the multimeter only beeps for a second on first touch of either of those pins :S.

EDIT: This behavior was only exhibited when attached to the pins on the ECU.

K-line is also not shorted to ground :).

[physyc]

Which red cable are talking about here? the small one? :) lol. Sorry for being such a noob :), I really appreciate the assistance.

The short one (red) is going to the bottom right pin of the connector that goes into the interface.

No problem.

you write:

however with the multimeter when applying a power source on the red/black short cables... I am not getting 12v+ on the red cables...

So you have Red cable where you put power on. and a red wire where you get NO power on?
so measure to what pin each red wire go. (you allready know for short. now do the same for long)

[poxxxy]

Bottom right pin when the switch is in the down position.

[physyc]

Bottom right pin when the switch is in the down position.

the short red = bottom right pin
the long red = ??

[poxxxy]

Yup the same bottom right pin when the switch is in the down position (center and connectionless terminals), they dont make a connection when flicked the other way with any pins on the connector.

[poxxxy]

Ok, I think i've got 12v on the harness now from the main DC plug input into the galletto... do I need another PSU on the line? I've tried adding another one onto the short red and black wires. Still only getting to 28% and not waking the ECU.

[physyc]

Yup the same bottom right pin when the switch is in the down position (center and connectionless terminals), they dont make a connection when flicked the other way with any pins on the connector.



however with the multimeter when applying a power source on the red/black short cables... I am not getting 12v+ on the red cables... the ground works though. So why I am not getting power on the red cables? Any ideas appreciated :).

So you know K-line is purple not blue.
You know how to get +12V
you know what is -12v/Ground

You know ecu k-line is not shorted to ground or +12V

You are ready to go...

:bounce:

[poxxxy]

Shame its not working :( lol

http://img528.imageshack.us/img528/8633/20120910211228.th.jpg (http://imageshack.us/photo/my-images/528/20120910211228.jpg/)
http://img198.imageshack.us/img198/1399/20120910211312.th.jpg (http://imageshack.us/photo/my-images/198/20120910211312.jpg/)

[poxxxy]

Ok, so I appear to have got things wrong, can't actually find a wire going to the 2nd pin in from the left, the purple is actually going to the 3rd pin from the left on the top. :(. Where is the K-line wire hiding! lol.

EDIT: Just tested every wire on the harness and nothing is connected to the k-line pin :(. If that is infact the pin, can anyone check theres? 2nd line in from the left on the top row on the male connector that meets the interface.

EDIT 2: Just took the plug apart: No wire on the pin... typical hah. Can anyone confirm what pin it should be that the interface is expecting for k-line?

[jr2185]

Ok, so I appear to have got things wrong, can't actually find a wire going to the 2nd pin in from the left, the purple is actually going to the 3rd pin from the left on the top. :(. Where is the K-line wire hiding! lol.

EDIT: Just tested every wire on the harness and nothing is connected to the k-line pin :(. If that is infact the pin, can anyone check theres? 2nd line in from the left on the top row on the male connector that meets the interface.

EDIT 2: Just took the plug apart: No wire on the pin... typical hah. Can anyone confirm what pin it should be that the interface is expecting for k-line?

Unplug the bench harness from the box and use the obd plug. You can still use the bench harness to power the ecu.

[poxxxy]

I used the obd plug for k-line.

Haven't got any cables that I could put on there... does anyone know the terminal crimp types that are commonly used on these so I can get some spares made up? Or recommend anywhere to buy some from? Success finally, k-line is the green cable after all that :)

[physyc]

Haven't got any cables that I could put on there... does anyone know the terminal crimp types that are commonly used on these so I can get some spares made up? Or recommend anywhere to buy some from?

go to scrapyard, ask for female ecu plug cut it out of car, pay 5euro for it, go home happy. if you are there ask female obd plug, pay 5euro for it. be more happy.

http://www.prueba.chiptuner.es/index.php?action=dlattach;topic=623.0;attach=1058; image

[minchion]

I checked cable connections and have K-line on pin 7 male connector obd coming from tool and K-line on green wires of boot cable you are using, anyway did you try connecting this wires to power source and see what happens ?

[poxxxy]

I checked cable connections and have K-line on pin 7 male connector obd coming from tool and K-line on green wires of boot cable you are using, anyway did you try connecting this wires to power source and see what happens ?I has tried that but they seem to be supplying power from the dc input. However, I got it wrong the kline is indeed green after all :). All working now!

[gzk]

does anyone tested on bmw edc17 , obd , bood mode ? what about the chks does the tool do it or do you need something else ?

[bearheroes]

On-board diagnostics - Wikipedia, the free encyclopedia (http://en.wikipedia.org/wiki/On-board_diagnostics)
check here which is K-line.This standard to every car.

[gka_3]

My soft don't start.
Problem with kernel32.dll file.

[Master01]

đđĐđß$đĐßđßđßđđääđłldkf>>;*;ßßߤߤ;>>;>ßߤ]$ß$÷÷×ßß]¤¤¤]ß$$[ß[¤ĐĐß[ß...

[minchion]

My soft don't start.
Problem with kernel32.dll file.
did you flash the FTDI chip with another bin, be shure you make a backup of yours before do it, mine worked finally with the original bin that comes from seller but a little har to make it work

[TribleX80]

Hello friends,

I have a problem found ;)

[camil]

Hello friends,

I have a problem.
I hope one of you can help me.: (
I have 3 new PCs and now there does not run the software!
To custom urgently 3 new ID password for my hardware.

Hir are my PC IDs for Key.

PC1 ID: Activation ID: PC 5392AEFF-FE4A
PC2 ID: Activation ID: PC 5908B2C2-4FCB
PC3 ID: Activation ID: PC 45FBC365-7123

My e-mail is (kuestner.andreas@gmx.de)

MFG

Andi

how to install:
- please create a new folder in C:/ in the name of "FGTech" or any location on your computer

- copy all folders/files from CD and paste into your new folder named C:/FGTech/ or any location on your computer

- run Get_Hardware-ID.exe , copy id number and e-mail us that ID

for example :
ME78CC99-4E61 ( when run Get_Hardware-ID.exe you will have like this an ID )
e-mail us that ID .
as soon as we receive your ID via e-mail,

We will send you user name and password for run software ( EOBD2.EXE )
like this:

''
user name : TEST
key : C9C3X-EWDU3-RZLB8-ZEGDJ-7L7KU-SNYLW-EGQWN-7B6AX-BT8X6-GUS6P
''

- connect FGTECH interface to USB, setup drivers ( in folder in drivers_USB )
- it is ready for use

REMARKS : SOFTWARE ( EOBD2.EXE ) CAN NOT OPEN WITHOUT INTERFACE!



******************************
OPERATIONAL SYSTEMS;

WINDOWS 2000 WITH SERVICE PACK 4/5

WINDOWS XP PROFESSIONAL WITH SERVICE PACK 3 EXPLORER 7

WINDOWS VISTA ALL VERSION 32 64 bit

WINDOWS 7 ALL VERSION 32 64 bit

DISABLE ALL THE ANTIVIRUS AND FIREWAALL ON YOUR PC



************
power cable :
RED : +12 Volt DC
BLACK : - GND

Contact your seller. Is best option.

[Africa]

Hi, Could those who had success reading/writing any 24V trucks with their clone post info on what ecus the gall works on?

nobody does fgtech2 truck with clone?

:ciao:

[vasa]

Contact your seller. Is best option.
I have same problem seller sen 7 days key and key is not valid. I thik FGteh is shit.

[physyc]

I have same problem seller sen 7 days key and key is not valid. I thik FGteh is shit.

If you change "fgtech" with "seller" you have the right sentence.

I think your seller is shit...

[wadim21]

opel astra 06 Marelli multijet 1.3mj
R\w 0k

opel edc15m W ok . k line

[xtreem]

opel astra 06 Marelli multijet 1.3mj
R\w 0k

opel edc15m W ok . k line


wat box? silver our black?

[xtreem]

any tested silver box on multijet 1.3mj and boot tricore?

I already tested it on siemens ppd 1.2 -passat 2000 tdi.
not read k and can. :(

[wadim21]

silver box

[xtreem]

any tested silver box on boot tricore?

[bearheroes]

any tested silver box on boot tricore?

tested and work perfect.

[cartechnics]

tested and work perfect
on EDC17C10 PSA
not WORK ON BDM EDC16C35 BMW
WORK WITH EU CLONE
NOT WITH SILVER BOX