Dreambox DM500C Won't Flash

[westkill]

try this its an alternative to dreamup

[ezay]

thanks mate ,
that didnt work either

Just says :
Opening COM port
Connecting to receiver....

[shady77]

who did you buy box from? get your money back mate

[ezay]

DVBSeller I bought it from.

[westkill]

dreamup and iport connect to mine ok can you try another pc maybe
or do you have another box you can try
have tryed starting the programe/dreamup with the box power on then pulling the plug and switching back on
or started the programe with the box switched off then power up he box

[ezay]

tried everything like that mate.

[ezay]

Just tried my other box which is working but it still wont read

[westkill]

do you mean the working box wont connect either m8

[ezay]

Yeah thats what I mean mate.

[westkill]

so it must be the pc , have you got another pc you can try
even reboot the pc ,see if com port works again
it should work if youve flashed boxes before

[dreadfand]

you are using a null modem cable not a serial right?

[ezay]

Did you even read my post I said I was using a null modem cable and I have flashed boxes with it before so it is obviously A Null Model Cable. And Iv'e Tried A Restart Going To Try A Different Pc Now.

[master-magic]

try this its an alternative to dreamup

thx i will try this as test.

[asterix]

thx i will try this as test.

Have you found solution on this one. Ihave sam isues with mine. It is the same problem.

[cgscott]

Have you found solution on this one. Ihave sam isues with mine. It is the same problem.

This thread is old. use the dreamup guide in the red stickys. You will sort it no problem.