Help with getting Dreambox working again

[mtv1]

could it be a clone box with wrong image try a clone safe image worth a try

[cgscott]

All images are clone safe. Except earlier released gemini images.

Definetly a signal issue.

[jewish]

Help-Attributes

Hi guys.

I`ve had to reflash my box with the latest image.
Went ok.
Input the keys over.
Went ok.

Only showing free channels.
Noticed that all the files in var/keys that the attributes is set to 644.
Could someone please tell me what they should be set to please as i think that is why i cant view anything?

Kind regards

[aftermath]

755 , also have you installed an Emu, ?

[jewish]

755 , also have you installed an Emu, ?

evocamd 212 is on it.

should all the files be set to 755?

[aftermath]

chmod the files in keys and / or scce to 755
also in keys/nagra as well
thats if your image has them folders.

dont try and chmod the folders, only the files inside them.

[jewish]

chmod the files in keys and / or scce to 755
also in keys/nagra as well
thats if your image has them folders.

dont try and chmod the folders, only the files inside them.

I set them all to 755 AFTERMATH but still not getting any pictures.
Also i remember you had to hold down the info button to bring the emu up but nothing happens when i do.

I`ve rebooted the box and enigma.

[aftermath]

can your box connect to the net via your router, if so you will need to install an emu. evocamd 2.12 for 500c should be ok.

[jewish]

can your box connect to the net via your router, if so you will need to install an emu. evocamd 2.12 for 500c should be ok.

its says cant resolve host name!

is it a file i can flash over?

[aftermath]

what image you using,?
you will need to set your ip address on the box to within a few of your router or PC ip address.

when you re boot the box from switching off, it should have a message saying " starting evocamd" or similar, if its not then you need to install a cam.

[jewish]

what image you using,?
you will need to set your ip address on the box to within a few of your router or PC ip address.

when you re boot the box from switching off, it should have a message saying " starting evocamd" or similar, if its not then you need to install a cam.

I`m using image dw2.1
can i just download the cam from somewhere and flash it over to a certain folder or does it have to be via the box on internet update?

ITS WORKING NOW MATE.
THANKS FOR ALL YOUR HELP.
KIND REGARDS.