DM800 Tuner Config

[ziggycat]

Hi.. I've got the smirnoff rules image on a dm800 with a cable tuner fitted. Looking around the forums I can't seem to find my problem listed anywhere.

On the tuner configuration screen the 'netid' field only allows me to enter 4 digits instead of 5. And on various threads it mentions to just set the provider to 'vermin' but I don't have this option anywhere.

All a bit confused by it TBH.

screenshot.jpg

[sigmadelta58]

If you download the Smirnoff june30 image, that has the ‘provider’ option on the config screen, if you use the arrow keys to scroll thru.
It comes up with 4101, and V****n, but it still scans ok.

Also, if you scan anyway, and then use autobouquets c2, it has a built in net area id selector.

I got a bit puzzled too at first.
But I eventually just did a factory reset, rebooted, and then did a software update.
Ran set up etc, and when I went to tuner config, it had the option of a 5 digit area id

[ziggycat]

I'm using the image from June 21 > [email protected]

I can't find a more recent one and the provider option is definately not on the menu.

[sigmadelta58]

The one I have is ‘800hd cable 2.01’, it’s by Smirnoff and its on page 1 of the downloads page.
800hd cable 2.01sim 84b - Downloads - Digital Kaos
Check it out, follow instructions, you don’t need a net id, and if you go to tuner config, you can change it from ‘frequency steps’ to provider .

[ziggycat]

Very strange as that's the exact image I am using. yet there's no option to select provider and can only enter 4 digits in the netid field.

Going to factory reset and flash again now ???? confused ???

[andy91]

Just do a scan it you will get a lot of failed transponders but it should scan about 576 channels.
That's all I did plus add net id.
When I added additional s/r I got error.
Andy

[anthmatthews]

You managed to sort your box yet??