Hi All
I live in sg and had a Dm500C which was working fine a few weeks ago. The image is Nabilsat Darkstar 2 and it is using mgcamd 1.31.
However a few days ago , I see all my channels but i can blank screen so i did the following after reading the noob guide in the download section.
I connect a null modem to the box , erase flash and flash it with dk1.1 and using evocamd as the emu.
Next using flashfxp , uploaded the keys and roms to /var/key and /var/scee.
I did a bruteforce automatic scan but i am unable to scan any services not even FTA.
I read through similar threads and repeat the steps however the results are the same, (unable to get any services nor FTA)
Next i did a manual transponder scan and i managed to scan some services and retrieve back FTA.
Next i press on info for 3 secs and restarted evocamd. Then I try to select one of the channels , however it comes up as blank screen. i press on "info" and select streaminfo , i am able to see the PID , SID etc and on the last page of the info , i can see the lock and sync checkboxes are ticked
This is the same for all other channels -> blank screen when selected although evocamd shows the title of the show and next programme etc.
Since then , i am struck at this stage and had been scratching my head.
I would really appreciate and thankful for any advice/help from the gurus in this forum
Thanks in Advance
I live in sg and had a Dm500C which was working fine a few weeks ago. The image is Nabilsat Darkstar 2 and it is using mgcamd 1.31.
However a few days ago , I see all my channels but i can blank screen so i did the following after reading the noob guide in the download section.
I connect a null modem to the box , erase flash and flash it with dk1.1 and using evocamd as the emu.
Next using flashfxp , uploaded the keys and roms to /var/key and /var/scee.
I did a bruteforce automatic scan but i am unable to scan any services not even FTA.
I read through similar threads and repeat the steps however the results are the same, (unable to get any services nor FTA)
Next i did a manual transponder scan and i managed to scan some services and retrieve back FTA.
Next i press on info for 3 secs and restarted evocamd. Then I try to select one of the channels , however it comes up as blank screen. i press on "info" and select streaminfo , i am able to see the PID , SID etc and on the last page of the info , i can see the lock and sync checkboxes are ticked
This is the same for all other channels -> blank screen when selected although evocamd shows the title of the show and next programme etc.
Since then , i am struck at this stage and had been scratching my head.
I would really appreciate and thankful for any advice/help from the gurus in this forum
Thanks in Advance
Comment