DM500 green led fix after flash

[nono_748]

Hi all,

After flash my DM with flashwizzard 6.3 and DK image, I deconnect and reconnect my DM and red led fix, nothing with the remote control.

I would like to reflash with dreamup but after conneting the laptop and the DM via null modem cablem, select COM1, connect, I connect my DM but dreamup say all the time "connection prepared, now switch on the dreambox!" and after maybe 2 or 3 minutes, the led switch off and no led on the front

I'm sure the DM start because when I connect the ethernet cable, I have confirmation connection but nothing and impossible to switch off with the swith facade button

Have you any idea ?

Thanks for your help

Nono

[Bonesy]

was the remote working before you flashed it? If so it could be just a bad flash.

If it wasnt, then check the cable in the unit hasnt come loose.

[nono_748]

Hy Bonesy,

Yes the remote working before.

I think it's just bad flash but I don't know to reflash the DM

Nono

[smirnoff_rules]

use dreamup and a null cable . turn the box off at the plug and then as your sending the firmware(or connecting to the box) turn the box back on at the plug

[dedea]

What version of dreamup you use,try with couple different dreamup versions maybe will work.

regards

[Bonesy]

have had this happen to myself, use dreamup, and reflash the box using null modem cable. NOT ethernet.

[nono_748]

Thanks guys for all informations.

I trying and tell you

Thanks

Nono

[nono_748]

After burned my fingers for craeted a null modem cable, I reflash my DM with DK image and everything is ok, just need to reinstall cccam, keys and scce.

Thanks all for your help

Nono

[lynas1234]

Hi i've had the same issue,

i think i may have done a bad flash on my dm500s,

i flashed the box and it got to about 84% and stuck,

now the box just switches on with a solid green light and nothing on the screen, it doesn't get an ip address,

and now won't communicate with my computer i've used various versions of dream up and a null modem cable, also i have tried a computer with a pci serial port and a computer with an onboard serial port and still nothing.

is there anyone that can help me sort my issue, or is it totally bricked?