Belfast, all channels went off
Collapse
X
-
no you shouldnt need it as long as you know the ip of your dreambox??
if you do, connect, send the files, and reboot.Setup: 2x Dreambox 800HD | 3x Dm500S on Motorised dish Setup
Comment
-
Go to a command prompt on your PC.
Type ipconfig and look for the ip address of your PC.
It will almost certainly be something like this:
192.168.1.x
Your dreambox will be x+1 or possibly x+2 or 3 depending on how many other bits of kit you have.
Just trial and error it until you get the right one.
GPComment
-
Did u get all the atatiopns back with the rescan. Premier and sky 1 dont seem to be working for me.phew ok, found solution..guys, after you do a rescan, check your red button in bouquets..you will see ALL NEW channels in there which WORK!
Seems like they have changed the mapping on ALL channels...those pesky vermin!
This means need to rebuild all chanels bouquets, which Im going to begin doing, starting in 5mins and then upload here to DK for others to grab. NOTE: These bouquets will be for Northern Ireland only.Comment
-
Has anyone else seen that when you go to "information" and look at an encrypted channels "stream info" its says coding systems used
1800h Kudelski (which is N1)
1841h Kudelski <<<<<< N3 test phase running parallel with N1
That's definitely only showed up recently, as I check this every now and then.... so I guess the more obvious question here is - how longs these test phases last until cleared to switch over?...as thats when we're screwed for goodLast edited by Sirus; 27 May, 2010, 22:35.Comment
-
Hey boys/girls, my channels are off too, did a google search and it brought me here, pitty can't download this though as I'm only a newbie.Ok, just finished and have uploaded new chanels & bouquests are now updated and sorted and more importantly working
Digital Kaos - Downloads - Northern Ireland Cable
So, enjoy and dont forget the thanks guys.Comment
-
-
good luck mate let us know how it goes,best to read everything before attempting,if using dream up most peeps get stuck on not setting com port up properlyComment
its been same every time an area has changed cant any of you lot read.
Comment