500c Problems

[SGDVB]

You could be using a poor quality cable from point to box or there could be some signal leakage.

If the wall point have been alter or relocate before, the cable used could also be an issue.

If on the information screen, the 02 %%% (top & bottom) keep going up & down then there are signal leakage for sure.

Mine's connected through a male cable to my wall socket.
Not throught the scart, so it's quite funny. i ordered 4 sets, only 2 sets happened to be like that.

[goondu]

i have similar problem on my 500C .... in S*******E...

Able to see the channel listings... but message "no data for this service available"

[goondu]

i have similar problem on my 500C .... in S*******E...

Able to see the channel listings... but message "no data for this service available"

anyone can help?

[EAMO 2]

anyone can help?

You should read last 5 pages in SG thread. PM or post for help

http://www.digital-kaos.co.uk/forums/f34/sgstarhub-digital-kaos-image-39241/index337.html#post962478

[Arraysys]

i have similar problem on my 500C .... in S*******E...

Able to see the channel listings... but message "no data for this service available"

anyone can help?

According to your message mentioned "no data for this service available". Sound like a hardware issue, but you may check your cable connection first.

[goondu]

According to your message mentioned "no data for this service available". Sound like a hardware issue, but you may check your cable connection first.

tested the set at another location...working fine....

still getting "no data for this service available"...

[EAMO 2]

tested the set at another location...working fine....

still getting "no data for this service available"...

As Arraysys said earlier problem is cable connection Check if it
has been disconnected somewhere internally or externally

[Arraysys]

tested the set at another location...working fine....

still getting "no data for this service available"...

Could it be the "problem" location is a new estate and cable NOT turn on?

[goondu]

Could it be the "problem" location is a new estate and cable NOT turn on?

probably so... but probably my hse not turn on ....